FC-280P4K0T4H2BNCXXXSXXXXAN
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The FC-280P4K0T4H2BNCXXXSXXXXAN, a product of the Danfoss VLT FC 280 Midi Drives series, offers versatility with enclosure sizes from K1 to K5. Operating at a power size of 0.37-22 kW for 3-phase 380–480 V, it boasts an efficiency of 78-83%. The drive's control structure is open loop, with ambient conditions from -10°C to 50°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
.The FC-280P4K0T4H2BNCXXXSXXXXAN is a frequency converter with a power rating of 4.0 kilowatts. The product is a midi drive that is relatively small and perfect for use in areas with limited spacing. This drive is a product of Danfoss Automation; it operates with three phases and has a mains voltage rating of between 380 to 480 volts. The electrical cables required for the complete wiring of this product include the control cables, equalizing cables, motor cables, mains cables and lots more. These cables are not part of the converter's delivery standard; they are required to be ordered as separate components by operators. The output motor cables should be run separately; only shielded cables should be used for this connection to prevent electrical accidents.
The FC-280P4K0T4H2BNCXXXSXXXXAN frequency converter controls the speed and torque on the motor shaft; it is also able to control the process for some applications that use process data as reference or feedback. Examples of these include motor temperature and pressure. The converter is cable to carry out two types of speed control. This includes the speed open-loop control, which does not require any feedback from the motor and the speed closed-loop PID control, which requires speed feedback to input. A properly optimized speed closed-loop control has a higher accuracy than a speed open-loop control. For the speed closed-loop PID control, operators can select which input to use as speed PID feedback in the parameter 7-00 speed PID feedback source.
The FC-280P4K0T4H2BNCXXXSXXXXAN frequency converter can handle asynchronous motors and permanent magnet synchronous motors up to 22 kilowatts, the current-sensing principle in the converter is based on the current measurement by a resistor in the DC link. The same resistor handles the ground fault protection and short circuit behavior of the converter.
Frequently Asked Questions about FC-280P4K0T4H2BNCXXXSXXXXAN:
Q: What type of enclosure does the FC-280P4K0T4H2BNCXXXSXXXXAN have?
A: The FC-280P4K0T4H2BNCXXXSXXXXAN is an IP20 product. It required installation in a control cabinet for reliable protection. \
Q: What type of motor design is compatible with the FC-280P4K0T4H2BNCXXXSXXXXAN drive?
A: This drive is motor independent. It Can be used with all major types of industrial motors.
Q: Is the FC-280P4K0T4H2BNCXXXSXXXXAN supplied with connection cables?
A: The cables required by this product for operation are not delivered with it. It have to be ordered separately.
Q: What does the Safe Torque off feature of the FC-280P4K0T4H2BNCXXXSXXXXAN do?
A: The Safe Torque Off (STO) is a mechanism that prevents the motor connected to the converter from restarting unexpectedly.
Q: How many types of speed control can the FC-280P4K0T4H2BNCXXXSXXXXAN carry out?
A: There are majorly 2 types of speed control that can be carried out by this converter. This include the speed open-loop control, and the speed closed-loop PID control.
