FC-280P22KT4H2BNCXXXSXXXXAX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-280P22KT4H2BNCXXXSXXXXAX belongs to the VLT FC 280 Midi Drives series and operates with a power rating of 22 kW and 30 horsepower. This drive supports three-phase voltage from 380 to 480 VAC and does not include a brake chopper or display.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-280P22KT4H2BNCXXXSXXXXAX is an AC variable-frequency drive manufactured by Danfoss within the VLT FC 280 Midi Drives series. The unit converts fixed utility power into a pulse-width-modulated output, allowing plant controllers to vary induction-motor speed and torque without mechanical throttling. It occupies the mid-range position between micro drives and high-power inverters, making it suitable for pumps, fans, and conveyors in automated production lines. The power stage regulates output frequency and voltage together, supporting controlled acceleration, deceleration, and steady operation as process demands change.
This model provides a continuous output of 22 kW, which is the electrical power available at the motor terminals under nominal operating conditions. For applications that use imperial units, this capacity corresponds to 30 HP. The input section accepts three-phase 380-480 VAC, allowing direct connection to common industrial power systems without an autotransformer. Motor speed can be adjusted across the operating range while the drive regulates output current to protect the connected equipment from excessive electrical loading. Dynamic energy from motor deceleration is not routed to an internal resistor because the drive has no brake chopper. An external braking device is required when the connected load produces substantial regenerative energy during frequent or rapid deceleration.
The drive uses an uncoated PCB, so it should be installed in a clean, dry enclosure that limits exposure to moisture, dust, and airborne contaminants. Its front panel has no integrated display, which means local parameter entry and status viewing require a compatible remote panel or PC-based tool. Remote access can be used to configure operating parameters, review drive status, and diagnose system conditions without an onboard keypad. Adaptation slots A and B are supplied with no adaptation in either slot, leaving the standard control arrangement unchanged for the intended application. The internal series code 280 associates the unit with accessories and configuration resources intended for this model range.
