FC-280P1K5S2E20H1XXCXXXSXXXXAX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-280P1K5S2E20H1XXCXXXSXXXXAX is part of the VLT FC 280 Midi Drives series and has a power rating of 1.5 kW or 2.0 HP. It operates on single-phase 200-240 VAC and features a coated PCB with IP20 protection. This drive comes with Modbus standard control, an EMC RFI filter for Cat C1 and C2, and does not include a brake chopper or display.
Internal Product Review
The FC-280P1K5S2E20H1XXCXXXSXXXXAX is a Danfoss VLT FC 280 midi drive rated for 1.5 kW with single-phase 200-240 VAC input. A coated PCB and EMC Cat C1/C2 RFI filter support dependable cabinet operation and clean electrical performance. Standard Modbus on the control card adds practical integration value, making the drive a strong choice for general-purpose industrial control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-280P1K5S2E20H1XXCXXXSXXXXAX is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 280 Midi Drives series. It converts fixed-frequency single-phase line power into a variable-frequency output that regulates the speed and torque of small induction motors. Its adjustable output also helps simple machines ramp motors more smoothly during starts and routine speed changes. By adjusting motor speed to match process demand, the drive supports energy-efficient operation of conveyors, mixers, and pump stations inside automated plants.
The drive accepts a rated input of single-phase 200–240 VAC, allowing connection to a light-industrial AC supply without a three-phase source. That input range is suited to installations where only single-phase service is available at the machine. At full load, it supplies 1.5 kW of output power, which is equivalent to 2.0 HP. The enclosure has an IP20 chassis protection class, so it must be installed inside a panel that prevents accidental contact with live parts. To limit radio-frequency noise, the integral filter meets EMC Category C1 at 200 V and C2 at 400 V, which helps reduce conducted emissions. No optional line accessories are selected, and both internal adaptation fields are set to none.
The power board uses a coated PCB that helps protect copper traces from moisture and airborne contaminants. A standard control card with Modbus provides an RS-485 port for straightforward PLC communication, and the link can be used for status exchange and parameter access. Because the configuration specifies no brake chopper, rapid deceleration must rely on motor losses or an external dynamic braking module. The drive is shipped without a local display, while the standard language pack supports multilingual parameter access through PC tools or a remote keypad. This arrangement allows setup from external interfaces without requiring a built-in keypad on the front of the housing.
