FC-280P1K1T4H2BNCXXXSXXXXAN
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The FC-280P1K1T4H2BNCXXXSXXXXAN drive offers high efficiency, an enclosure size of K1, and a power rating of 1.1 kW. A part of the VLT Midi Drive FC 280 series by Danfoss, it has a weight of 2.3 kg or about 5.1 lb. Like other FC280P1K1 units, it boasts high efficiency.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Frequency converters from Danfoss are known for their reliability, high efficiency, and wide operating range. Their converters are typically used for variably controlling three-phase motor parameters such as speed, torque, power, and current. Depending on the size of the frequency converter, the number of supported inputs and outputs may vary. The FC-280P1K1T4H2BNCXXXSXXXXAN is one of Danfoss’ most efficient frequency converters released under the FC-280 product line. It has a typical shaft output of 1.1 kilowatts and a supply voltage of 380 to 480 volts. During nominal conditions, the converter dissipates 40 watts of power in the form of heat. At this estimated power loss, the converter achieves an efficiency of 97.2%.
At the rated mains voltage supply, the FC-280P1K1T4H2BNCXXXSXXXXAN draws a continuous and intermittent current input of 2.6 A and 4.2 amperes. On its output side, the FC-280P1K1T4H2BNCXXXSXXXXAN delivers a continuous current of 3 amperes at a mains voltage of 380 to 440 volts. When the mains voltage reaches 441 to 480 volts, the continuous output current of the converter compensates to 2.8 amperes. Intermittently, the converter can draw a current of 4.8 amperes for 60 seconds. To safely support the current across the FC-280P1K1T4H2BNCXXXSXXXXAN at all times, the maximum motor and mains cable cross-section must be 12 AWG.
Similar to other Danfoss’ frequency converters under the VLT series, the FC-280P1K1T4H2BNCXXXSXXXXAN can withstand an ambient temperature range of 0 to 45 degrees Celsius at full-scale operation. At reduced performance, however, the FC-280P1K1T4H2BNCXXXSXXXXAN can safely operate at a minimum ambient temperature of -10 degrees Celsius. With an IP 20 enclosure, the FC-280P1K1T4H2BNCXXXSXXXXAN can withstand an equivalent vibration of 1.14 g. To acquire this frequency converter with a one-year warranty, contact Wake Industrial’s sales team now.
Frequently Asked Questions about FC-280P1K1T4H2BNCXXXSXXXXAN:
Q: What is the maximum motor cable length for the FC-280P1K1T4H2BNCXXXSXXXXAN?
A: For shielded cables, the FC-280P1K1T4H2BNCXXXSXXXXAN can support a maximum length of 50 m. For unshielded cables, the maximum length supported is 75 m.
Q: What terminals correspond to the digital inputs in the FC-280P1K1T4H2BNCXXXSXXXXAN?
A: Terminals 18, 19, 27, 29, 32, and 33 are designated as digital inputs in the FC-280P1K1T4H2BNCXXXSXXXXAN.
Q: Which digital input terminal can be configured as a digital output in the FC-280P1K1T4H2BNCXXXSXXXXAN?
A: Terminal 27 of the FC-280P1K1T4H2BNCXXXSXXXXAN may optionally be configured as a digital output instead of an input.
Q: What terminals correspond to the STO (safe torque off) input/s for the FC-280P1K1T4H2BNCXXXSXXXXAN?
A: Terminals 37 and 38 can be used for STO inputs in the FC-280P1K1T4H2BNCXXXSXXXXAN.
Q: What terminals correspond to the analog inputs for the FC-280P1K1T4H2BNCXXXSXXXXAN?
A: Terminals 53 and 54 can be used as analog inputs for the FC-280P1K1T4H2BNCXXXSXXXXAN. Optionally, terminal 53 can be used as a digital input instead of an analog input.
