FC-280P18KT4H2BNCXXXSXXXXAN Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-280P18KT4H2BNCXXXSXXXXAN belongs to the VLT FC 280 Midi Drives series and has a power rating of 18.5 kW, or 25 horsepower. This midi drive operates with a three-phase 380-480 VAC input and does not feature a brake chopper or display panel.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-280P18KT4H2BNCXXXSXXXXAN is an AC variable frequency drive produced by Danfoss for controlling the speed of induction motors in automated plant equipment. It converts fixed-frequency mains power into a variable-frequency three-phase output, allowing connected conveyors, pumps, and fans to operate at speeds suited to changing load demands. Adjusting motor speed can reduce unnecessary energy use when the application does not require full output. The compact housing supports installation in cabinets with limited panel depth, provided that the enclosure has adequate airflow and the required electrical clearances.
The drive has a rated motor power of 18.5 kW, which indicates the continuous motor load it can support under the applicable operating conditions. Its input accepts a three-phase 380–480 VAC supply, allowing connection to common industrial power systems within that voltage range. The product belongs to the Midi Drive FC group and carries the internal series identifier 280. Its power stage regulates output voltage and frequency to control motor acceleration, operating speed, and deceleration. Appropriate upstream protection, grounding, and motor cabling are required to maintain stable operation within an industrial control cabinet.
The power stage has no brake chopper, so regenerative energy from rapid deceleration cannot be directed to a braking resistor through an integrated chopper circuit. Applications that generate substantial regenerative energy must use a suitable external arrangement or adjust deceleration behavior to prevent excessive DC-bus voltage. The control board has a standard varnish without a coated PCB, so the drive should be installed in a clean, dry enclosure that limits exposure to moisture, conductive dust, and chemical vapors. The unit includes no display, which means local parameter entry and status viewing are unavailable directly from the drive. Configuration and monitoring can instead be performed with a compatible remote keypad, PC-based tool, or supported fieldbus connection. The base configuration omits optional adaptation features, leaving the standard control and interface arrangement unchanged.
Frequently Asked Questions about FC-280P18KT4H2BNCXXXSXXXXAN:
Q: What is the motor horsepower for the FC-280P18KT4H2BNCXXXSXXXXAN drive?
A: The FC-280P18KT4H2BNCXXXSXXXXAN is equipped with a 25 HP motor output.
Q: What is the power rating of the Danfoss FC-280P18KT4H2BNCXXXSXXXXAN drive?
A: This model has a power rating of 18.5 kW for medium-scale applications.
Q: What is the operating voltage for the FC-280P18KT4H2BNCXXXSXXXXAN VLT Midi Drive?
A: The drive operates with a three-phase supply voltage range of 380-480 VAC.
Q: Does the FC-280P18KT4H2BNCXXXSXXXXAN come with a brake chopper?
A: This FC-280P18KT4H2BNCXXXSXXXXAN drive does not include a brake chopper feature.
Q: Is there a display included on the FC-280P18KT4H2BNCXXXSXXXXAN drive?
A: There is no built-in display included with this model from Danfoss.
