FC051P15KT4E20H3BXCXXXSXXX/PL3 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC051P15KT4E20H3BXCXXXSXXX/PL3 is part of the VLT FC 51 Micro Drives series and delivers a power rating of 15 kW with a current rating of 31.0 Amps. It is designed for 3-phase 380-480 VAC input and offers IP20 enclosure protection. This drive measures 292 mm in height, 125 mm in width, 241 mm in depth, and weighs 6.0 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC051P15KT4E20H3BXCXXXSXXX/PL3 is a variable-frequency drive manufactured by Danfoss for the VLT FC 51 Micro Drives series. It converts fixed-frequency three-phase power into a modulated output waveform so that induction motors in automated lines can run at commanded speeds and torques. The device is used in compact panels that control conveyors, pumps, and simple material-handling stations where space and wiring capacity are limited. Its compact design supports variable-speed motor control without requiring a large enclosure.
Its continuous output capacity is 15 kW, which is the maximum power the inverter can sustain under rated conditions. The power section accepts a supply of 3 x 380–480 VAC, making it compatible with common industrial power systems, and it draws up to 31.0 A when operating at full load. An enclosure classification of IP20 permits cabinet installation while preventing accidental finger contact, although additional sealing is required in dusty or wet areas. Conducted emissions are limited by the integrated filter, allowing the unit to satisfy the C2 EMC category when motor cable lengths remain within the permitted limits. The drive does not have a brake chopper, so regenerated energy must be handled by external equipment. Coated circuit boards help protect the electronics from airborne contaminants, while the absence of a local control panel reduces the number of exposed surfaces.
The drive measures 292 mm high, 125 mm wide, and 241 mm deep within the M4 frame size. With a mass of 6.0 kg, it can be mounted without specialized lifting equipment, but the line terminals require a tightening torque of 1.3 Nm for secure electrical connections. Continuous operation is permitted at temperatures up to 40 °C without derating. Standard cable entries under Adaptation A allow cables to be routed through cabinet gland plates. The factory-mounted A1/B RFI network reduces common-mode electrical noise. Incoming power connects directly to the drive terminals because the unit has no additional mains option.
Frequently Asked Questions about FC051P15KT4E20H3BXCXXXSXXX/PL3:
Q: What input voltage range does the Danfoss FC051P15KT4E20H3BXCXXXSXXX/PL3 VLT Micro Drive support?
A: The FC051P15KT4E20H3BXCXXXSXXX/PL3 supports input voltage of 3x380-480 VAC, suitable for standard industrial three-phase power supplies.
Q: What is the current rating of the FC051P15KT4E20H3BXCXXXSXXX/PL3 Micro Drive?
A: This model has a current rating of 31.0 A, accommodating higher current industrial motor applications.
Q: What type of enclosure protection does the FC051P15KT4E20H3BXCXXXSXXX/PL3 provide?
A: The FC051P15KT4E20H3BXCXXXSXXX/PL3 has an IP20 enclosure rating, providing basic protection against solid objects but not against water.
Q: What is the maximum power rating for the FC051P15KT4E20H3BXCXXXSXXX/PL3?
A: This drive features a power rating of 15 kW, making it suitable for moderately powerful motors.
Q: Does the FC051P15KT4E20H3BXCXXXSXXX/PL3 include a local control panel?
A: There is no local control panel on the FC051P15KT4E20H3BXCXXXSXXX/PL3, so adjustments must be made remotely or via external controls.
