FC-051PK75S2E20H3XXCXXXSXXX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The FC-051PK75S2E20H3XXCXXXSXXX is a micro drive from Danfoss, part of the VLT FC 51 Micro Drives series, with a power rating of 0.75 kW and 1.0 HP. It operates on a single phase, 200-240 VAC mains voltage and features an IP20 protection level with coated PCB. The drive includes standard cable entries and an RFI filter Class A1/B.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-051PK75S2E20H3XXCXXXSXXX is an AC variable-frequency drive produced by Danfoss for the VLT FC 51 Micro Drives series. It belongs to the VLT Micro Drive product group and serves as a compact controller that converts fixed mains power into variable-frequency output for small induction motors in conveyors, pumps, and general machine automation. By modulating frequency and voltage, the unit enables speed regulation and energy savings in installations where panel space and simple setup are priorities.
The drive delivers a nominal output of 0.75 kW, which corresponds to approximately 1.0 HP, from a supply range of 200–240 VAC. It is designed for single-phase input, allowing connection to common low-voltage distribution without a dedicated three-phase feed. The IP20 chassis enclosure requires installation inside a suitable cabinet when dust or moisture is present. Power and control wiring enter through standard cable entries, simplifying cable routing and gland plate selection. The unit does not include a brake chopper, so a braking resistor cannot be connected directly to an internal chopper circuit. The device carries series index 051, which corresponds to the physical format and operating platform used for this FC 51 model.
The built-in electromagnetic compatibility stage is rated as RFI Class A1/B, helping the drive limit conducted electrical noise on residential or light-industrial supply networks. A coated circuit board improves resistance to humidity and airborne contaminants when the drive operates in a cabinet without climate control. The model does not include a local control panel, so drive settings are entered through compatible PC software or a remote keypad. Adaptation B is not applied to this configuration, and optional mains input components are not installed. These choices leave the front of the compact unit unobstructed while allowing its operating parameters to be accessed through an external interface.
Frequently Asked Questions about FC-051PK75S2E20H3XXCXXXSXXX:
Q: What input voltage and phase does the FC-051PK75S2E20H3XXCXXXSXXX support?
A: The FC-051PK75S2E20H3XXCXXXSXXX operates on a single phase with 200 - 240 VAC input voltage.
Q: What is the output power rating of the FC-051PK75S2E20H3XXCXXXSXXX drive?
A: This model from the VLT FC 51 Micro Drives series is rated at 0.75 kW, equivalent to 1.0 horsepower.
Q: What protection level is offered by the FC-051PK75S2E20H3XXCXXXSXXX?
A: The drive provides protection at the IP20 level with a chassis enclosure.
Q: What RFI filter classification is used in the FC-051PK75S2E20H3XXCXXXSXXX?
A: The RFI filter for this drive is rated as Class A1/B.
Q: Does the FC-051PK75S2E20H3XXCXXXSXXX have a coated PCB?
A: The FC-051PK75S2E20H3XXCXXXSXXX comes with a coated PCB for increased environmental resistance.
