Product Description:

The FC-051P2K2T2E20H3BXCXXXSXXX is an AC variable-frequency micro drive produced by Danfoss for the VLT FC 51 Micro Drives series. Designed for cabinet installation, the unit converts fixed-frequency utility power into a modulated output that allows automation controllers to regulate induction-motor speed without mechanical throttling. By matching motor torque to real-time load demand, it helps conveyors, pumps, and compact processing equipment maintain accurate throughput while limiting energy waste. Its compact format allows the drive to fit into control panels where mounting space is limited. The variable-frequency output also supports gradual acceleration and deceleration, reducing mechanical stress on connected equipment during routine operation.

The input section accepts 200–240 VAC, a range that aligns with low-voltage industrial networks. Operation with a three-phase supply balances current across the lines and reduces electrical stress on the mains. A continuous mechanical output of 2.2 kW indicates the maximum power that can be delivered to the motor shaft. Conducted emissions are attenuated by the integrated filter rated at RFI Class A1/B, allowing the drive to operate near instrumentation in ordinary industrial settings without additional external filtering. The power section adjusts output frequency and voltage in response to control commands, allowing the connected motor to operate across the speed range required by the application. This regulated output is suitable for machinery that needs repeatable speed changes rather than continuous operation at the utility frequency.

Physical integration is simplified by standard cable entries, so power and control conductors can pass through common metric gland plates. The drive includes a brake chopper, allowing excess regenerative energy to be dissipated through an external resistor during rapid deceleration or emergency stops. A coated PCB protects sensitive circuitry from airborne contaminants that could otherwise collect on exposed electronic components. The IP20 chassis enclosure protects against accidental contact with internal parts and is intended for installation inside a clean, closed control panel. Because a local control panel is not included, operating commands and adjustments are handled through the available external control connections. The standard mains configuration supports direct integration with compatible low-voltage distribution systems without specialized supply adaptation.