Product Description:

The FC-051P2K2T2E20H3BXCXXX is a variable-frequency drive manufactured by Danfoss for the VLT FC 51 Micro Drives series. This compact inverter modulates the incoming AC supply to regulate speed and torque on small industrial motors, allowing energy-efficient control in conveyors, pumps, and other general automation equipment. Because it uses adjustable output frequency and voltage, the drive can match motor operation to process demand instead of running at full speed at all times. The unit operates without a local control panel, so parameter access is handled through remote programming tools or a detachable keypad when needed.

The drive accepts a nominal line voltage of 200 – 240 VAC on a three-phase network, allowing direct connection to common low-voltage plant mains. Its continuous output is rated at 2.2 kW, which corresponds to about 3.0 HP of mechanical motor power under normal operating conditions. The enclosure is classified as IP20 / chassis, which means the installed unit is touch-safe inside a control cabinet but is not sealed against dust or moisture. This layout suits panel installations where protection is provided by the surrounding enclosure rather than by the drive housing itself.

Electromagnetic compatibility is supported by an integrated RFI Class A1/B filter that helps reduce conducted noise on the supply leads. The printed circuit boards have a coated PCB finish that helps protect soldered surfaces from ambient humidity and airborne contaminants in typical industrial settings. For dynamic deceleration, the built-in brake chopper routes regenerative energy to an external resistor when the motor is slowing under load. Power and control connections pass through standard cable entries, which support straightforward routing through common gland plates and cabinet openings.