FC-051P2K2S2E20H3BXCXXXSXXX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-051P2K2S2E20H3BXCXXXS is part of the VLT FC 51 Micro Drives series and provides a power rating of 2.2 kW, equivalent to 3.0 HP. It is designed for single-phase operation at 200 to 240 VAC mains voltage and has an IP20 chassis protection level. This micro drive features a brake chopper, a coated PCB, and an RFI filter rated Class A1/B.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-051P2K2S2E20H3BXCXXXSXXX is an AC variable frequency drive produced by Danfoss for the VLT FC 51 Micro Drives series. It controls small induction motors used in conveyors, pumps, fans, and HVAC auxiliary equipment. The drive converts fixed-frequency mains power into a regulated output, allowing the connected motor to operate at a speed that matches process demand. Its compact format supports installation in light-industrial control cabinets where panel space is limited, while adjustable acceleration and deceleration help reduce mechanical stress on connected equipment.
The model provides up to 2.2 kW of continuous output power, corresponding to a motor rating of approximately 3.0 HP. It operates from a supply range of 200–240 VAC and uses a single-phase input, making it suitable for facilities that do not provide three-phase power at the installation point. An integrated RFI Class A1/B filter reduces conducted electromagnetic interference on the incoming supply. The standard drive configuration does not include custom adaptation hardware, and its control architecture supports the parameter functions associated with the FC 51 platform. Motor speed and torque can be adjusted through compatible remote controls or external command signals, allowing the drive to respond to changing operating requirements without direct manual adjustment at the unit.
The enclosure has an IP20 chassis rating, so the drive must be installed inside a suitable cabinet that protects it from moisture, conductive debris, and accidental contact. A coated printed circuit board improves resistance to airborne moisture and contaminants that may be present in industrial environments. The integrated brake chopper directs regenerated energy to a compatible braking resistor during rapid deceleration, helping prevent excessive DC-bus voltage. Power and control conductors enter through standard cable entries, which provide a straightforward path for cabinet wiring. The unit does not include a local control panel, so parameter entry and operating commands require a compatible remote keypad or another supported control connection. No separate mains option is installed, and any required safety stop function must be provided through appropriate external safety equipment rather than the brake chopper.
Frequently Asked Questions about FC-051P2K2S2E20H3BXCXXXSXXX:
Q: What phase configuration is required for the FC-051P2K2S2E20H3BXCXXXSXXX micro drive?
A: This model operates on a single-phase power supply.
Q: What is the power rating of the Danfoss FC-051P2K2S2E20H3BXCXXXSXXX?
A: The FC-051P2K2S2E20H3BXCXXXSXXX provides a power rating of 2.2 KW.
Q: What braking feature is included with the FC-051P2K2S2E20H3BXCXXXSXXX?
A: The integrated brake chopper allows for safe stop functionality.
Q: Does the FC-051P2K2S2E20H3BXCXXXSXXX have a coated PCB?
A: This model features a coated PCB for enhanced circuit protection.
Q: What is the mains voltage range supported by the FC-051P2K2S2E20H3BXCXXXSXXX?
A: The drive is rated for input voltages from 200 to 240 VAC.
