136N8924 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-051P1K5S2E20HXBXCXXXSXXX
The Danfoss 136N8924 is part of the VLT FC 51 Micro Drives series and offers a power rating of 1.5 kW or 2.0 HP. It operates on a single phase with a mains voltage of 200 to 240 VAC and includes a brake chopper. The micro drive features a coated PCB and has an IP20 chassis protection level.
Internal Product Review
The 136N8924 is a Danfoss VLT FC 51 micro drive with a 1.5 kW power rating and 200 to 240 VAC mains voltage. Single-phase input and a coated PCB make this unit a dependable option for compact drive installations. The integrated brake chopper is a valuable feature for controlled stopping performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 136N8924 is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 51 Micro Drives series. It converts fixed-frequency mains power into a pulse-width-modulated output, allowing automation systems to regulate motor torque and speed without mechanical throttling. Its compact footprint supports installation in conveyors, packaging lines, and HVAC auxiliary systems that require repeatable acceleration and deceleration profiles. Closed-loop control allows the drive to adjust its output in response to operating conditions and motor demand.
The drive accepts a supply of 200 to 240 VAC from a single-phase branch circuit, eliminating the need for three-phase service in light-duty panels. Its inverter section provides a continuous output of 1.5 kW, which is equivalent to 2.0 HP. This capacity allows the drive to operate motors commonly used in fans, pumps, and light conveyor systems. An integrated brake chopper routes regenerated energy to an external resistor, helping suppress overvoltage during rapid deceleration. The standard configuration does not include a mains option, so any required harmonic filters or disconnects must be installed separately. No special mechanical adaptation kits are included with the drive. The unit uses Micro Drive series code 051 within the VLT Micro Drive product group.
The housing has an IP20 chassis rating, so the drive must be installed inside a protective cabinet that limits exposure to conductive dust and liquids. Its coated printed circuit boards help protect internal electronics from airborne moisture and fine particles. Wiring passes through standard cable entries, allowing commonly available glands and fittings to be used for cable routing. The absence of a local control panel means that parameter access is handled through a supported communication connection or PC software. This arrangement keeps the front of the unit free of operator keys while preserving access to configuration and diagnostic functions. Adequate cabinet clearance should be maintained around the chassis so heat can dissipate during continuous operation.
