132F0060 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-051P18KT4E20H3BXCXXXSXXX
The Danfoss 132F0060 is a three-phase drive from the VLT FC 51 Micro Drives series with a power rating of 18.5 kW and a 25 HP output. It features a brake chopper, coated PCB, RFI Class A1/B filter, and supports mains voltages from 380 to 480 VAC. The drive has an IP20 chassis protection level with standard cable entries and does not include a local control panel.
Internal Product Review
The 132F0060 is a Danfoss VLT FC 51 Micro Drive with an 18.5 kW rating and three-phase input capability. Coated PCB construction and IP20 chassis protection give the drive a well-finished industrial design suited to clean panel installations. Brake chopper support adds useful control flexibility, making 25 HP performance the standout advantage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 132F0060 is a variable frequency drive produced by Danfoss for the VLT FC 51 Micro Drives series. It modulates the supply waveform to regulate induction motor speed in compact conveyors, pumps, and fans used throughout industrial automation. The drive adjusts motor speed to match process demand, reducing reliance on valves, dampers, or other external throttling devices. Its compact chassis supports installation in control cabinets where available mounting space is limited.
The drive accepts a nominal input of 380–480 VAC from a three-phase network. It can deliver up to 18.5 kW (25 HP) at its output terminals, providing sufficient capacity for medium-sized industrial motors. An integrated brake chopper manages regenerated energy during rapid deceleration and allows connection of suitable external braking components. The unit has standard cable entries under Adaptation A, allowing cable glands to be mounted directly without modifying the base enclosure. The model carries internal series code 051 and the VLT Micro Drive product-group identifier, which support the applicable parameter structure for this drive family. Because the drive has no mains option, line protection and disconnect devices must be installed externally. The unit is supplied with no local control panel, so operating commands and parameter changes require a compatible remote interface or separate programming device. This arrangement allows the drive to receive speed references and control signals from a centralized automation system.
The enclosure provides an IP20 chassis protection level, offering finger-safe shielding when the drive is installed inside a suitable cabinet. A built-in RFI Class A1/B filter reduces conducted electrical interference and helps limit noise transferred through the incoming power lines. The printed circuit boards have a protective coating that guards sensitive electronic components against airborne contaminants. Proper cabinet ventilation remains necessary to remove operating heat and maintain suitable internal temperatures. External line protection, control connections, and braking components should be selected according to the connected motor, supply network, and application requirements.
