132F0058 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-051P11KT4E20H3BXCXXXSXXX
The Danfoss 132F0058 is part of the VLT FC 51 Micro Drives series and features a power rating of 11 kW or 15 HP. This three-phase micro drive is designed for 380 to 480 VAC power and is equipped with a brake chopper, RFI Class A1/B filter, and an IP20 chassis protection level. Its PCB is coated and it does not include a local control panel.
Internal Product Review
The 132F0058 is a Danfoss VLT FC 51 micro drive with an 11 kW rating. Three-phase input at 380 to 480 VAC supports clean integration in standard industrial power systems. Brake chopper capability and a coated PCB add valuable control flexibility and durability, making the drive a strong choice for compact drive applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 132F0058 AC variable frequency drive is produced by Danfoss as part of the VLT FC 51 Micro Drives series. The unit is intended to regulate the speed of small-to-mid-range induction motors used in conveyors, pumps, fans, and general machinery. By varying its output frequency, the drive allows a control system to match motor speed and torque to changing process demands. This controlled operation can reduce unnecessary energy use when connected equipment does not need to run continuously at full speed.
The drive accepts a supply of 380–480 VAC from a three-phase network, allowing direct connection to common industrial power systems. Its continuous output rating is 11 kW, which corresponds to 15 HP and supports moderate fan, pump, and conveyor loads. A built-in brake chopper routes regenerated energy to a compatible braking resistor during rapid deceleration. This function helps control rising DC-bus voltage when a driven load returns energy to the inverter. The drive does not include a mains disconnect, so suitable upstream circuit protection and isolation equipment must be installed. It is also supplied without a local control panel, so parameter access requires a compatible external control or programming interface.
The drive uses an IP20 chassis that must be installed inside a suitable control panel to protect it from dust, moisture, and accidental contact. Motor and line conductors pass through standard cable entries, allowing conventional cabinet wiring without special entry hardware. An integrated RFI Class A1/B filter limits conducted electrical noise and supports use in general industrial installations. A protective coated PCB helps shield the control electronics from moisture and airborne contaminants that could affect operation. The internal micro-drive code is 051, and no additional mechanical adaptation is installed. Circuit breakers, fuses, and other upstream protective devices must be selected according to the connected supply, motor load, and applicable installation requirements.
