132F0030 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-051P7K5T4E20H3BXCXXXSXXX
The Danfoss 132F0030 is part of the VLT FC 51 Micro Drives series and features a 10 horsepower rating with a power output of 7.5 kW. It operates on a three-phase 380 to 480 VAC power supply and provides IP20 protection. The drive also includes a coated PCB, a brake chopper for safe stop functionality, and an integrated RFI Class A1/B filter.
Internal Product Review
The 132F0030 is a Danfoss VLT FC 51 micro drive rated at 7.5 kW for three-phase systems. IP20/chassis protection and a coated PCB support dependable cabinet installation in controlled industrial environments. Operation across 380 to 480 VAC makes this unit a strong choice for compact variable-speed drive applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 132F0030 is a compact AC variable-frequency drive produced by Danfoss for the VLT FC 51 Micro Drives series. It regulates the speed of small and medium induction motors used in conveyors, pumps, ventilation equipment, and other automated machinery. By converting fixed-frequency mains power into a controlled three-phase output, the drive allows motor speed to follow process demand without mechanical throttling. Its compact enclosure fits inside control panels where available cabinet space is limited, while electronic acceleration and deceleration control reduces the mechanical stress associated with abrupt starts and stops.
The unit delivers a continuous output of 7.5 kW, which corresponds to 10 HP. It accepts a mains supply of 380–480 VAC, making it suitable for common low-voltage industrial power systems. The drive uses a three-phase input, so it can connect directly to a compatible three-phase source without phase conversion equipment. Its output terminals are housed in an IP20 chassis, which provides protection against accidental finger contact but requires installation inside a suitable switchboard or control enclosure. The FC 51 control functions support ramped starts, adjustable acceleration, and slip compensation for torque-dependent loads. These functions allow the connected motor to change speed gradually while maintaining stable operation as the mechanical load varies.
An integrated electromagnetic compatibility network provides conducted noise suppression rated at RFI Class A1/B, supporting operation in residential and light-industrial environments when the drive is installed correctly. For emergency deceleration or applications with overhauling loads, the inverter includes a brake chopper that directs regenerated energy to a compatible external braking resistor. Internal electronic components are protected by a coated PCB, which improves resistance to moisture and airborne contaminants within the surrounding enclosure. Wiring is routed through standard cable entries, allowing conventional power, motor, and control cables to enter without a custom gland plate. The drive does not include a local control panel, so settings are entered through the FC 51 programming connection with compatible operating equipment. No additional mains disconnect is installed in the unit, so supply isolation must be provided elsewhere in the electrical system.
