Product Description:

The 132F0026 is an AC variable-frequency drive manufactured by Danfoss as part of the VLT FC 51 Micro Drives series and the VLT Micro Drive product group. It is intended for installation in distributed control panels, where it converts fixed mains power into a modulated output that regulates induction-motor speed in conveyor, pump, and fan applications across general automation. By providing speed control, torque limiting, and controlled ramping, the drive helps connected machinery match load demand during startup, steady operation, and deceleration while keeping the installation compact.

Electrical compatibility centers on a mains input of 380 - 480 VAC, allowing the drive to operate on common industrial supply networks. The input must be three-phase, so line current is shared across all phases and harmonic distortion is reduced. Internally, the power stage is sized for a continuous output of 4.0 kW, which corresponds to a mechanical rating of 5.0 HP at the motor shaft. These ratings indicate the motor size the drive can start, accelerate, and run without derating, and they also guide circuit breaker selection, cable sizing, and thermal management inside the enclosure.

Protection and auxiliary features are suited to small-panel integration. The enclosure has an IP20 / Chassis rating, so it must be mounted inside a cabinet but does not require additional finger-safe covers. Conducted emissions are limited by the integrated RFI Class A1/B filter, which helps with EMC compliance in mixed-voltage cabinets. Dynamic stopping energy is routed to the internal brake chopper, eliminating the need for external resistor switching. Long-term durability is supported by a coated PCB that shields traces from moisture and dust. The drive uses micro-drive code 051. Standard cable entries and the absence of a local control panel make the unit suitable for compact OEM equipment where parameters are set through a fieldbus or remote keypad.