132F0014 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-051P2K2T2E20H3BXCXXXSXXX
The Danfoss 132F0014 is part of the VLT FC 51 Micro Drives series and has a power rating of 2.2 kW or 3.0 HP. This three-phase micro drive features standard cable entries, an IP20 chassis protection level, and supports input voltage between 200 and 240 VAC. It includes a brake chopper, RFI filter Class A1/B, and coated PCB for added durability.
Internal Product Review
The 132F0014 is a Danfoss VLT FC 51 micro drive for 200 - 240 VAC three-phase operation. A coated PCB and RFI Class A1/B filtering support clean integration and dependable performance in industrial panels. A built-in brake chopper complements the 2.2 kW rating, a valuable combination for controlled deceleration in compact drive applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 132F0014 is a compact AC variable frequency drive produced by Danfoss for the VLT FC 51 Micro Drives series. It takes line power and supplies a regulated three-phase output so small conveyors, pumps, and fans can operate at the speed requested by a PLC or analog reference. By adjusting motor speed to match process demand, the drive can reduce unnecessary energy use in applications that do not require continuous full-speed operation. Its compact footprint also supports installation in shallow control enclosures where a larger drive may not fit.
The power section accepts a mains supply of 200 to 240 VAC and is designed for three-phase networks commonly used on low-voltage factory buses. At the motor terminals, the inverter can deliver 2.2 kW for compatible loads. The enclosure has an IP20 chassis design with finger-safe touch guards, making the drive suitable for protected cabinet mounting without additional enclosure gasketing. Internal parameter storage allows operating settings to remain in the unit without requiring an external local control panel. The base configuration retains the standard connector arrangement and mounting-hole pattern used by this drive platform.
For dynamic stopping tasks, a built-in brake chopper directs regenerated energy to an external resistor, helping prevent DC-bus overvoltage when loads decelerate quickly. Conducted emissions are managed by a factory-mounted RFI Class A1/B filter that limits switching noise for general-purpose industrial use. The control board uses a coated printed circuit board, which adds resistance to moisture and airborne contaminants in humid operating areas. Power and signal conductors pass through standard cable entries, simplifying strain-relief selection while preserving the intended cabinet installation arrangement. Because the drive does not include a dedicated mains disconnect, an upstream circuit breaker or contactor must provide electrical isolation before service work begins.
