132F0005 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-051P1K5S2E20H3BXCXXXSXXX
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss 132F0005 is part of the VLT FC 51 Micro Drives series and has a power rating of 1.5 kW with a typical efficiency of 96.7 percent. This drive supports a single-phase 200-240 VAC supply, and features a continuous output current of 6.8 Amps. It is housed in an IP20 enclosure, measures 176 by 75 by 168 millimeters, and weighs 1.9 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 132F0005 is a compact AC variable frequency drive produced by Danfoss for the VLT FC 51 Micro Drives series. As a micro drive, it converts fixed-frequency, single-phase mains power into a variable-frequency output that allows controllers to adjust small induction motors used for conveyors, pumps, or simple machine axes. The unit regulates motor speed so energy consumption and mechanical stress correspond to process demand. Its compact design is suitable for control panels where installation space is limited.
During continuous operation, the drive draws 18.7 A from the mains and delivers 6.8 A to the motor terminals. During acceleration or rapid load changes, it can accept 26.4 A and supply 10.2 A for up to one minute. These current limits help determine suitable upstream fusing and the motor size that can be started without nuisance trips. At a typical motor load, the electronic conversion stage reaches a measured efficiency of 96.7%, so most input energy is transferred to the motor rather than dissipated as heat. With a single-phase input, the internal inverter synthesizes a three-phase output waveform. The integrated A1/B (C1) RFI filter limits conducted emissions to category C1 requirements for installations connected to public low-voltage networks.
Inside a control panel, the drive occupies a footprint measuring 75 mm wide, 168 mm deep, and 176 mm high. It weighs 1.9 kg, making backplate mounting straightforward without adding substantial weight to the enclosure. Thermal losses are limited to 67.0 W, allowing convection cooling inside an IP20 housing when ambient air can circulate freely. The power stage supports a 200–240 VAC supply and produces up to 1.5 kW of shaft power when paired with an appropriately rated motor. Field wiring accepts copper conductors up to 4 mm² (10 AWG), accommodating commonly used machine cables without requiring oversized conductors. Adequate panel clearance should be maintained around the housing to support airflow and provide access to the wiring terminals.
Frequently Asked Questions about 132F0005:
Q: What is the power rating of the Danfoss 132F0005 micro drive?
A: The VLT FC 51 132F0005 micro drive has a power rating of 1.5 kW, supporting applications with modest power requirements.
Q: What supply voltage is required for the 132F0005 drive?
A: This model operates with a supply voltage range between 200 and 240 VAC.
Q: What input phase is supported by the Danfoss 132F0005 micro drive?
A: The Danfoss 132F0005 is rated for single-phase input, making it suitable for systems lacking three-phase supply.
Q: What is the maximum continuous output current of the 132F0005 unit?
A: The maximum continuous output current for the 132F0005 is 6.8 A.
Q: What is the enclosure protection rating for the 132F0005?
A: This micro drive is protected with an IP20 enclosure rating, which provides limited protection against solid objects and no protection against liquids.
