FC-101P3K7T6E20H Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-101P3K7T6E20H is part of the VLT FC 101 HVAC Basic Drives series and provides a rated power of 3.7 kW with a rated output current of 6.1 A at 551-600 V. This three-phase drive features IP20 protection, supports a maximum output frequency of 400 Hz, and has dimensions of 269 by 130 by 205 mm. It belongs to energy efficiency class IE2 and weighs up to 6.6 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-101P3K7T6E20H is an AC variable-frequency drive manufactured by Danfoss as part of the VLT FC 101 HVAC Basic Drives series. It converts fixed-frequency plant power into a modulated output that lets building automation controllers regulate fan, pump, or compressor speed according to real-time demand. By adjusting motor speed instead of throttling dampers or valves, the unit lowers energy use while maintaining precise airflow or water flow in industrial ventilation and chiller systems.
This drive connects to three-phase mains rated at 525–600 VAC, drawing a continuous input current of 5.6 A and delivering an output current of 6.1 A at the motor terminals. With a rated shaft power of 3.7 kW (5 HP), it can support medium-sized fans or pumps. The inverter can modulate its output up to 400 Hz, allowing motors to run above base speed when airflow or head pressure must be increased. The unit maintains consistent torque across the frequency range through vector control. Its three-phase topology helps limit harmonic distortion on facility feeders. The frame’s thermal design supports full output at the upper supply voltage limit.
The drive meets IE2 efficiency targets, and its housing carries an IP20/chassis designation that permits installation inside a control cabinet. In the H9 frame, the front panel is 269 mm high and 130 mm wide, while the enclosure is 205 mm deep. The assembly weighs 6.6 kg, allowing secure installation on a suitable back plate. The drive accepts conductor sizes up to 4 mm², and unshielded motor cables may be up to 50 m long without exceeding the stated electromagnetic compatibility limits. A clearance of 100 mm above and below the heat sink must be maintained to support convection airflow. The chassis design allows the control boards to slide out without disturbing the power section during service.
