FC-101P30KT6 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-101P30KT6 is a three phase HVAC drive from the VLT FC 101 HVAC Basic Drives series. It features a power rating of 30 kW and supports continuous output currents up to 43.0 A at 525-550 V. The drive also provides 2 analog inputs, 4 digital inputs, and 2 relay outputs for flexible connectivity.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-101P30KT6 is a variable-frequency drive manufactured by Danfoss for the VLT FC 101 HVAC Basic Drives series. Delivered under the VLT HVAC Drive product group, it converts fixed-frequency three-phase power into a regulated output that matches fan or pump speed to the actual building load. Adjusting motor speed to demand reduces energy consumption and mechanical wear in air-handling units, chillers, and booster sets throughout commercial HVAC installations. The drive can regulate airflow, water pressure, or circulation rates without relying solely on mechanical throttling devices.
Rated for 30 kW (40 HP), the inverter accepts a supply of 525–600 VAC and operates at an efficiency of 98.5%. In the 525–550 V range, it can sustain a motor current of 43.0 A. When the input increases to the 551–600 V range, the unit draws 42.9 A from the mains and supplies a corresponding motor current of 41.0 A. Two analog outputs retransmit speed or pressure reference signals, and the built-in relay pair can switch dampers or bypass contactors directly. Four digital inputs handle run-enable, fire-mode, or fault-reset signals, while two analog inputs support proportional control from devices such as differential-pressure transmitters. These interfaces allow the controller to respond to external commands and process feedback without requiring separate signal-conversion modules.
During short acceleration or purge cycles, the drive delivers an intermittent output of 47.3 A on 525–550 V feeders. At 551–600 V, the surge limit is 45.1 A, while the continuous line-current rating on the lower voltage range is also 45.1 A. Internal power dissipation is limited to 542 W, allowing cabinet airflow and heat removal to be planned around a known thermal load. Power cabling with conductors up to 35 mm² (AWG 2) can be connected to the unit. Unshielded power cable may extend up to 50 m without exceeding the applicable electromagnetic compatibility limits. The three-phase topology supports standard high-voltage HVAC motors used in large fans, pumps, and centralized building systems.
Frequently Asked Questions about FC-101P30KT6:
Q: What is the supported motor power for the FC-101P30KT6 drive?
A: The FC-101P30KT6 has a power rating of 30 kW and supports up to 40 HP motors.
Q: What input voltage does the Danfoss FC-101P30KT6 require?
A: This drive operates on a mains voltage range of 525 to 600 VAC for three-phase supply.
Q: How many analog inputs are provided on the FC-101P30KT6?
A: There are two analog inputs available on the FC-101P30KT6 for sensor or control integration.
Q: What is the largest cable size compatible with the FC-101P30KT6 drive?
A: The maximum cable size supported is 35 mm² (AWG 2) for power connections.
Q: What is the energy efficiency rating of the FC-101P30KT6 HVAC drive?
A: This model achieves an efficiency of 98.5%, contributing to energy-saving HVAC applications.
