FC-101P11KT4E20H4
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The Danfoss FC-101P11KT4E20H4 is part of the VLT HVAC Basic Drive FC 101 series, boasting a power capacity of 11 kW. It operates on a voltage of 380-480 V in 3-phase and enables 15-25% energy savings while functioning up to 40°C. Additionally, it integrates a smart logic controller and a unique cooling concept.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-101P11KT4E20H4 is a highly efficient three-phase frequency converter created originally by the company Danfoss. It operates at an ambient temperature range of up to 45 degrees Celsius at an AC line voltage range of 380 to 480 volts. At rated conditions, the typical shaft output of this converter is 11 kW, or about 15 hp. Assuming favorable ambient operating conditions, this unit can achieve a continuous output current of 23 amperes. In intermittent operating mode, the corresponding output current may briefly reach an RMS value of 25.3 amperes. Typically, the corresponding power loss and efficiency of the FC-101P11KT4E20H4 are 274 watts and 97.9%. At best, however, this device can achieve an efficiency of 98.1% and a corresponding power loss of 248 watts.
When the FC-101P11KT4E20H4 is operated at a higher ambient temperature (50 degrees Celsius), the output current of the converter decreases. In continuous mode, the output current at 50 degrees Celsius is 20.9 A. In intermittent mode, the converter achieves an output current of 23 amperes. The FC-101P11KT4E20H4 comes with an integrated EMC filter that adheres to the standards of the EN 55011 class A1 and EN/IEC 61800-3 cat. 2. Specifically, the RFI filter integrated in the FC-101P11KT4E20H4 prevents the interference of other electromagnetic signals on the circuit level.
With an H4 enclosure, the FC-101P11KT4E20H4 is practically protected from accidental grounding through the fingers. With this type of enclosure, the unit has a protection category of IP 20. To support both the rated continuous and intermittent output current, the FC-101P11KT4E20H4’s mains and motor wiring must have a maximum cable size of 6 AWG or 16 sq. mm. Wake Industrial offers this powerful frequency converter with a one-year warranty.
Frequently Asked Questions about FC-101P11KT4E20H4:
Q: What is the FC-101P11KT4E20H4’s weight?
A: With an IP 20 enclosure, the FC-101P11KT4E20H4 weighs 7.9 kilograms or 17.4 pounds.
Q: What type of inputs does the FC-101P11KT4E20H4 support?
A: The supports both digital (programmable) and analog inputs.
Q: What type of outputs does the FC-101P11KT4E20H4 contain?
A: The FC-101P11KT4E20H4 contains both digital, analog, and relay outputs.
Q: What is the current range of the FC-101P11KT4E20H4’s analog output?
A: The FC-101P11KT4E20H4’s two analog outputs each have a current range of 0 to 20 mA.
Q: What is the voltage range for the FC-101P11KT4E20H4’s analog inputs?
A: The FC-101P11KT4E20H4’s analog inputs have a voltage range of 0 to 10 V.
