131N0243 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-101P30KT6P20HXXXXXXXSXXXXAXBXCXXXXDX
The Danfoss 131N0243 is part of the VLT FC 101 HVAC Basic Drives series and supports a power rating of 30 kW, or 40 horsepower. This three-phase drive operates at 525 to 600 VAC and features an IP20 protection level with a chassis backplate. It comes without a local control panel or RFI filter and uses standard cable entries.
Internal Product Review
The 131N0243 is a three-phase VLT HVAC drive rated at 30 kW for steady motor control in building systems. Operation on 525 - 600 VAC and IP20 chassis protection make this unit a strong fit for enclosed panel installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 131N0243 is an AC variable frequency drive produced by Danfoss for the VLT FC 101 HVAC Basic Drives series. Within the VLT HVAC Drive product group, this controller varies the speed of centrifugal pumps and fans so building automation systems can match airflow or water flow to actual demand and reduce energy use. It follows the dimensional guidelines for the 101 series, mounts inside an electrical panel, and connects directly to a utility power supply without requiring an external transformer. Its variable-speed output is suitable for HVAC applications that require controlled acceleration, deceleration, and continuous adjustment of motor speed.
During operation, the unit delivers 30 kW of continuous motor power, which is equivalent to 40 HP, when connected to a supply ranging from 525–600 VAC. The input section supports a three-phase input and provides the electrical arrangement needed for compatible industrial motors. The electronics are installed in an IP20 chassis/backplate enclosure intended for clean indoor control cabinets that prevent exposure to water and excessive contamination. The drive has a lack of a brake chopper, so an external braking resistor cannot be connected for dynamic stopping. It also does not contain an integrated harmonic filter, leaving any required mains-side harmonic reduction to upstream equipment.
Adaptation A provides standard cable entries, while Adaptation B does not add any customized features. The A, B, and D option slots are empty, and the C0 and C1 expansion positions do not contain expansion modules. Operator access is limited because the unit is supplied with no local control panel, so settings and operating commands must be provided through the available external control connections. The drive uses uncoated circuit boards, making installation in a dry cabinet important where corrosive moisture or chemical vapor is not present. Electromagnetic interference suppression is not integrated because the unit includes no RFI filter; any filtering needed for the installation must therefore be provided separately. The mains option position is also empty, so the incoming supply connects through the drive’s standard input arrangement.
