131N0184
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-101P3K0T4E5AH3XAXXXXSXXXXAXBXCXXXXDX
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The 131N0184 drive offers a motor power of 3 kW, an output current of 7.2 A at 40°C, IP54 enclosure protection, and features dimensions of 115 mm x 332 mm x 225 mm. As part of the VLT FC 101 HVAC Basic Drives from Danfoss, it supports BACnet MSTP, Modbus RTU, and weighs 5.3 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 131N0184 basic drive manufactured by Danfoss offers optimized HAV control. This control supports the operation of compressors, pumps, and fans. The product features an integration of DC coils that helps to minimize the harmonics and space needed for external systems. This device is programmed using its control panel on the front. The unit portrays a dangerous voltage with an active mains connection. Its operation must be undertaken in compliance with the instructions highlighted in its manual. This drive’s protective earthing must abide by the local and national regulations.
The product’s power supply and motor must be disconnected before working on it. This device supports a reinforced protective earth connection with at least 10 mm² cross-section as per IEC 61800-5-1 specifications. The unit’s installation altitude should not exceed 2 Km. Its connections should not be removed when it is in the powered phase. This drive’s front panel has an Off/Reset key. The product is CE Certified and cULus Listed. This device mustn’t be disposed along with domestic waste due to its electronic components. The unit’s cabling is recommended with copper conductors. Its U, V, and W terminals are used to connect the motor.
This drive’s installation, commissioning, and maintenance are best done by trained personnel. The product-related motor can start at any time when it is connected to the DC supply or AC mains. This device’s leakage current is more than 3.5 mA. The unit comprises discharge dampers that lower power consumption. It can change the speed of the pump or fan and offer variable pressure and flow control. This basic drive’s PI controller monitors the air quality as well as temperature.
Frequently Asked Questions about 131N0184:
Q: What motors does the 131N0184 drive control?
A: The 131N0184 drive controls permanent and induction motors.
Q: How many languages does the display of the control panel of the 131N0184 drive support?
A: The display of the control panel of the 131N0184 drive supports eight languages.
Q: What PC can the setup software of the 131N0184 drive be installed in?
A: The setup software of the 131N0184 drive be installed in a Windows PC.
Q: What happens when the 131N0184 drive is subject to an over-temperature?
A: When the 131N0184 drive is subject to an over-temperature, it enters the trip state.
Q: What is the advantage of using the 131N0184 drive to control the speed of a pump or a fan?
A: The advantage of using the 131N0184 drive to control the speed of a pump or a fan is electricity savings.
