134H0404 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FCD302P1K5T4W66H1XYXXXXXXXXXANBXXXXXXDX
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
47 Seconds
The Danfoss 134H0404 is part of the VLT FCD 302 Decentral Drives series and has a power rating of 1.5 kW or 2 HP. It operates with a mains voltage of 380-480VAC three phase and comes in a standard white IP66/NEMA4X enclosure. The drive is equipped with an Ethernet IP A option and includes an RFI filter rated at Class A1/C2.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 134H0404 is a decentralized variable-frequency drive produced by Danfoss for the VLT FCD 302 Decentral Drives series. It is intended for machine-mounted use, where the drive can sit near the driven motor instead of inside a central electrical enclosure. Mounted close to the motor it controls, the unit regulates speed and torque so conveyors, mixers, and similar loads can be tuned without long shielded motor cables. By moving the power electronics onto the machine frame, it simplifies cabinet layouts and shortens installation time in distributed industrial automation.
The communication slot is factory-populated with the EtherNet/IP A-option, allowing cyclic control data to move directly over common plant networks. For power, a three-phase supply of 380-480 VAC feeds an inverter stage that delivers up to 1.5 kW, equivalent to 2 HP, at the motor terminals. This output level suits compact decentralized drive points that need local motor control without a remote cabinet-mounted inverter. The housing is a Standard White IP66/NEMA 4X enclosure, so it can be used in washdown areas and locations exposed to outdoor splash. Conducted emissions are limited by the built-in RFI Class A1/C2 filter, which reduces the need for additional external line components.
No auxiliary holding mechanism is included, so the unit has no brake. Field wiring stays simple because there is no fieldbus plug and no brackets supplied, so accessories can be selected to match local conduit or cable-tray requirements. The unit also omits a B-option card, a D-option module, and the mains, motor, and sensor plugs, and there is no switch option or installation box. Threads for an installation box are not tapped, and the absence of a display connector keeps setup on PC tools or network commands rather than on a local keypad. The remaining accessory choices are left open so the mounting and cable-entry arrangement can match the surrounding machine layout.
Frequently Asked Questions about 134H0404:
Q: What network communication option is included with the 134H0404 drive?
A: The Danfoss 134H0404 drive supports Ethernet IP as the A Option for network communication.
Q: What is the mains voltage requirement for the 134H0404?
A: This model operates on a three-phase mains voltage range of 380-480VAC.
Q: What type of enclosure does the 134H0404 use?
A: The 134H0404 features an IP66/NEMA4X standard white enclosure, offering strong protection against dust and water.
Q: What is the power rating of the Danfoss 134H0404?
A: The power rating for this drive is 1.5 kW, suitable for moderate load applications.
Q: Does the 134H0404 drive come with a brake?
A: There is no brake included on the 134H0404 according to its specifications.
