Product Description:

The 134G0024 is a decentralized variable-frequency drive from Danfoss and belongs to the VLT FCD 302 Decentral Drives series. Mounted directly on or near the motor, the unit converts fixed-frequency mains power into a controlled output that matches process demands for conveyors, pumps, and fans. This arrangement reduces long motor cable runs and supports machine-mounted installations where a cabinet-based drive is not preferred. It is intended for distributed automation layouts that place power electronics close to the driven equipment. This placement also helps keep distributed machine sections self-contained during operation.

For network integration, the drive is supplied with a fieldbus A option that supports Profibus DP, allowing cyclic speed and diagnostic data exchange with PLCs over a single twisted pair. It uses a standard black housing with an IP66/NEMA 4X rating to block dust and high-pressure water in washdown areas. Its motor output is rated at 1.5 HP, which is equivalent to 1.1 kW and suits small induction motors used in auxiliary plant equipment. The power section accepts 380-480 VAC three-phase supply and uses PWM to provide smooth acceleration. The design omits a mechanical brake, brackets, and D-option modules.

EMC performance is supported by an integrated RFI Class A1/C2 filter, which reduces conducted noise on the supply lines. Field wiring uses an M12 Profibus plug for communication and cable entries with metric threads, which fit common metric gland hardware. The unit includes a display connector for parameter upload, but it does not include a B-option board, switch option, or auxiliary sensor connections. Mains, motor, and sensor plugs are not included, so the cable entry arrangement can be matched to the machine layout. The available connections focus on core power, communication, and setup functions.