134F5987 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FCD302PK75T4B66H1X1EMFCXXXXXALBXXXXXXDX
The Danfoss 134F5987 is part of the VLT FCD 302 Decentral Drives series and provides a power rating of 0.75 kW (1.0 HP). It features a standard black IP66/NEMA4X enclosure and includes a Profinet communication option. This model offers a service switch on the motor side and is equipped with a display connector and metric threads.
Internal Product Review
The 134F5987 is a Danfoss VLT FCD 302 decentral drive with a 0.75 kW, 1.0 HP rating that fits distributed motor control applications very well. Three-phase 380-480 VAC input and Profinet communication support clean integration across modern automation networks. The IP66/NEMA 4X enclosure and motor-side service switch make this drive a strong choice for decentralized installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 134F5987 is a decentralized variable frequency drive produced by Danfoss for the VLT FCD 302 Decentral Drives series. Mounted directly on or near the motor, it regulates induction motor speed without a separate control cabinet, reducing cable runs in conveyor lines, pumps, and fan arrays. The unit converts plant-level three-phase power and houses its own control electronics. It also provides a removable display connector for local parameter access, allowing settings and operating data to be viewed at the installation point.
Network integration is handled through Profinet, so real-time setpoints and diagnostic data travel over standard industrial Ethernet wiring. The power section accepts a three-phase supply range of 380–480 VAC, matching common low-voltage grids found in manufacturing plants. At the motor terminals, the inverter can deliver up to 0.75 kW, which corresponds to 1.0 HP. This output is suitable for small process drives, zone conveyors, compact pumps, and similar motor-driven equipment. The housing has a protection rating of IP66/NEMA 4X, which protects the internal components against dust and high-pressure water jets. This enclosure allows the drive to operate in washdown or outdoor areas without requiring an additional protective cabinet.
An integrated RFI Class A1/C2 filter attenuates conducted electrical noise, supporting compliance with applicable industrial emission limits when the drive is properly grounded. A built-in motor-side service switch isolates the drive output, allowing motor power to be locked out while the control wiring remains energized. Mechanical attachment points use metric threads, allowing the unit to be mounted directly to compatible gearboxes or machine frames. The aluminum base plate aligns with surrounding structures through flat brackets, providing rigid support and a thermal path for heat dissipation. This configuration does not include a brake circuit, mains plug, motor plug, or sensor plug. Its compact stand-alone layout supports installation in locations where mounting space is limited and long motor cable runs are undesirable.
