134F2135

Product Description:

The 134F2135 model from Danfoss fits into the VLT FCD 302 Decentral Drives family and gives plant setups a direct answer for powering up machinery close to where the action happens. Rated at 1.5 kW, this three-phase drive doesn’t take much space and runs with an input of 380-480 VAC. Not every drive in the shop will handle the odd spill, but this model carries IP66 / NEMA 4X protection, holding up against washdowns or dust. There’s no unneeded bulk, just a clean enclosure and a build meant for busy floors. There’s a display connector on board and metric thread types, giving the hardware team an easier time when mounting or wiring in a tight panel.

Weight is tagged at 9.8 kg, which keeps handling practical for one person when it’s time to hang it on the line or swap for replacement. Since the drive is decentralized, installation usually runs closer to your equipment — but not too close to cause crowding — leaving more space open and shortening cable runs. The display connector works as an access point for quick setups or tweaks to parameters. With metric threading, there’s less chance of confusion when picking fasteners out of the bin. Danfoss products are always found tied into busy automated lines, and this drive holds up with minimal fuss in plant environments where stops and starts can’t slow things down.

Inside the box, features add up to hassle-free operation. The drive uses an RFI filter, Class A1/C2 and has a mounting arrangement called complete small stand alone to keep installs neat. The ratings cover heavy cleaning and the wakes of machine fluids, so electricals stay safe inside. System noise stays low, even powering three-phase loads.