131X6013 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FCD302PK75T4W66H1XXXXXXXXXXXA0BXXXXXXD0
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
5 Seconds
The Danfoss 131X6013 is a decentralized drive from the VLT FCD 302 Decentral Drives series, featuring a power rating of 0.75 kW (1.0 HP) and supports a three-phase mains voltage of 380-480VAC. It includes Profibus DP communication, has a 24VDC backup input, and is housed in a standard white IP66/NEMA4X enclosure. This drive is equipped with an RFI Class A1/C2 filter and does not include a display connector or brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 131X6013 is a decentralized variable-frequency drive produced by Danfoss within the VLT FCD 302 Decentral Drives series. Installed near the motor, the unit converts the incoming three-phase supply into regulated output that controls speed and torque in conveyor sections, pumps, or small fan modules on distributed automation lines. Its decentralized layout keeps motor leads short and reduces the need for a separate cabinet-mounted inverter on modular machines. This mounting approach is useful on distributed lines where long motor cables would otherwise add routing complexity and require more enclosure space.
The drive delivers 1.0 HP of mechanical output, equivalent to 0.75 kW, when it is supplied from a 380 to 480 VAC three-phase mains source. This power level suits small induction motors used on distributed conveyor or pump stations. The housing uses the standard white IP66/NEMA 4X enclosure version, so it resists washdown cleaning and outdoor spray without a control cabinet. Control data reach the inverter through the A-option interface, which in this unit is Profibus DP, allowing integration with PLC networks over a shielded two-wire bus. Brackets, an external B-option card, and fieldbus, sensor, motor, or mains plugs are not provided, so installation requires cable glands or hard-wired terminations. No installation box threads are present, and no switch option is installed.
For service continuity, the D-option port accepts a 24 VDC backup input, which keeps the control electronics active during mains interruptions so fieldbus communication can be retained. Emitted radio noise is limited by the integrated RFI Class A1/C2 filter, helping the unit fit typical industrial EMC environments. Mechanical stopping torque must be supplied by the driven machine because the drive is specified with no brake, which reduces weight and avoids brake wear on horizontal axes. Parameter adjustment is handled through remote tools because there is no display connector on the front cover. This arrangement leaves the enclosure face simple and sealed against moisture. Software and general option fields are reserved in the ordering code.
Frequently Asked Questions about 131X6013:
Q: What fieldbus communication option is present in the 131X6013 drive?
A: This model includes the Profibus DP as its A Option for fieldbus communication.
Q: What is the enclosure rating for the Danfoss 131X6013 drive?
A: The enclosure is rated Standard White IP66/NEMA4X, providing a high level of protection against dust and water.
Q: What mains voltage does the 131X6013 drive from Danfoss support?
A: This unit operates with a mains voltage of 380-480VAC and requires a three-phase power supply.
Q: What is the power rating of the Danfoss VLT FCD 302 131X6013?
A: The drive is rated for a power output of 0.75 kW (1.0 HP).
Q: What RFI filter class is provided on the 131X6013 drive?
A: It is equipped with an RFI filter conforming to Class A1/C2 standards.
