134F3017 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-360H7K5T4E20H2BXCDXXSXXXXALBX
The Danfoss 134F3017 is part of the VLT FC 360 Automation Drives series and features a power rating of 7.5 kW with a 10 HP high overload capability. It has an IP20 chassis protection level, coated PCB, loadsharing mains option, and a built-in brake chopper. The drive operates on three-phase 380-480VAC and includes a control card with ProfiNet support.
Internal Product Review
The 134F3017 is a Danfoss VLT FC 360 automation drive with a 7.5 kW rating and 380-480 VAC three-phase input. A ProfiNet control card and integrated brake chopper support efficient networked control and dependable deceleration handling. High overload capability and IP20 chassis protection make the drive a strong choice for enclosed industrial panels.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 134F3017 variable-frequency drive is manufactured by Danfoss for the VLT FC 360 Automation Drives series. Positioned within the VLT AutomationDrive FC product group, it is intended to regulate induction motor speed in material-handling, pumping, and ventilation systems. By recreating a sinusoidal waveform through pulse-width modulation, the unit allows the control system to match motor torque to real-time process demands. Its compact design also limits the amount of cabinet space required by the switching hardware. The drive can support applications that require controlled acceleration, deceleration, and continuous speed adjustment.
The drive accepts a three-phase input of 380–480 VAC and can deliver up to 7.5 kW, or approximately 10 HP, of mechanical output when sized for constant-torque applications. A built-in brake chopper manages regenerated energy during rapid deceleration and permits connection to an external braking resistor without an additional brake module. The housing has an IP20 chassis protection rating, making it suitable for installation inside a clean electrical cabinet. Standard cable entries provide uncomplicated routing for power and control wiring. Load sharing allows multiple inverters to exchange bus power when connected in a compatible system. The front panel is supplied without a display, so parameters must be accessed through a remote keypad or a supported fieldbus tool.
Electromagnetic interference is reduced by an integrated RFI Class A2 filter. The power stage includes a coated printed circuit board that resists moisture and airborne contaminants, supporting operation where condensation or fine particles may otherwise affect exposed electronics. Command and diagnostic traffic passes through a control card with PROFINET, providing deterministic industrial Ethernet communication without an auxiliary gateway. This connection supports the exchange of operating commands, status information, and diagnostic data with a compatible automation controller. The thermal model is rated for high-overload duty, allowing intermittent loading of up to 150 percent when starting machines with high inertia. A standard language pack provides multilingual menu support when the drive is accessed with a compatible interface.
