134F3013 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-360H2K2T4E20H2BXCDXXSXXXXALBX
The Danfoss 134F3013 is part of the VLT FC 360 Automation Drives series and features a 3.0 HP rated power with a 2.2 kW high overload capacity. This drive operates on a three-phase 380-480VAC input, has coated PCB protection, and includes a brake chopper and an RFI Class A2 filter. It includes a control card with ProfiNet and offers an IP20 chassis protection level.
Internal Product Review
The 134F3013 is a Danfoss VLT FC 360 automation drive with a 2.2 kW rating for 380-480 VAC three-phase service. High-overload capability and an integrated brake chopper make the drive especially appealing for dynamic duty cycles and controlled deceleration. A ProfiNet control card adds clean network integration, making this drive a strong choice for modern automation panels.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 134F3013 automation drive is produced by Danfoss for the VLT FC 360 Automation Drives series. As a member of the VLT AutomationDrive FC product group, this unit regulates the speed of three-phase induction motors used in conveyors, pumps, and general industrial machinery. By modulating the mains frequency and voltage, the drive allows motor output to follow real-time load requirements, improving process control and reducing mechanical stress. Its variable-frequency operation also supports controlled acceleration and deceleration, which can reduce abrupt load changes in connected equipment.
It operates from a 380–480 VAC three-phase input and delivers a continuous shaft output of 2.2 kW, equivalent to 3.0 HP. The chassis has an IP20 enclosure classification, so it must be mounted inside a protected cabinet that prevents unintended contact and exposure to contaminants. A built-in RFI Class A2 filter limits conducted emissions on the supply lines. The printed circuit boards are conformally coated to help protect the electronics from moisture and airborne contaminants. All power and control conductors enter through standard cable entries under Adaptation A. Adaptation B is set to No Adaptation, and the B Option is not installed. The front panel does not include a display, but the Standard Language Pack remains available through compatible service tools.
For dynamic duty cycles, the power stage supports high-overload operation, allowing short-term current surges when starting or accelerating a load. Excess regenerative energy is managed by the integrated brake chopper, which allows the drive to direct braking energy to a compatible resistor when required. The load-sharing option allows multiple inverters to exchange energy through a common DC link, reducing demand from the mains during regenerative operating conditions. Command and diagnostic traffic passes through the installed control card with PROFINET, giving the controller deterministic access to operating parameters and status registers. This network connection supports coordinated communication with compatible automation controllers while keeping control and diagnostic data on a common industrial Ethernet interface.
