134F2975 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-360H2K2T4E20H2BXCDXXSXXXXAXBX
The Danfoss 134F2975 is part of the VLT FC 360 Automation Drives series and has a power rating of 2.2 kW with a 3.0 HP output. It features a brake chopper, coated PCB, and loadsharing mains option. The drive operates on 380-480V three-phase power and provides IP20 protection with RFI Class A2 filtering.
Internal Product Review
The 134F2975 is a Danfoss VLT FC 360 automation drive rated for 2.2 kW with 380-480 VAC three-phase input. High-overload capability and a brake chopper make the drive a strong fit for dynamic industrial duty. A coated PCB and IP20/chassis protection support dependable panel integration in controlled enclosures.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 134F2975 is an AC variable frequency drive manufactured by Danfoss for the VLT FC 360 Automation Drives series. Within the VLT AutomationDrive FC product group, it converts fixed-frequency line power into a variable-frequency output that allows a PLC or other controller to regulate induction motor speed and torque. This functionality supports controlled motion in packaging lines, pump stations, conveyors, and material-handling cells. The drive regulates acceleration, deceleration, and steady-state operation electronically, reducing the need for mechanical flow-control devices or other inefficient speed-control methods.
Continuous mechanical output is rated at 2.2 kW, which is equivalent to 3.0 HP and supports motors commonly used in light industrial equipment. The input bridge accepts a three-phase 380–480 VAC input, covering typical 400 V and 460 V plant supplies without requiring an autotransformer. The drive supports high-overload operation, allowing it to provide elevated current for short intervals when starting conveyors, centrifuges, or other loads with high inertia. Its IP20 chassis provides basic protection against accidental finger contact and is intended for installation inside a suitable control panel or enclosure. Standard cable entries accommodate the power and control wiring needed for chassis-mounted installation.
Electromagnetic interference is reduced by an integrated RFI Class A2 filter, which helps limit conducted noise from the switching power stage. Excess regenerative energy can be directed through the built-in brake chopper during rapid deceleration, helping control DC-bus voltage when the connected motor returns energy to the drive. A coated printed circuit board protects the control electronics against moisture and airborne contaminants encountered in industrial environments. The mains section also supports load sharing, allowing compatible power modules to exchange energy through a shared DC connection. Control functions are handled by a standard control card, and operator prompts use the standard language pack. The drive does not include a local keypad, so configuration and operating commands are provided through remote control tools or an available communication interface.
