134B1732
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The 134B1732 is a straight female stud fitting designed for 15 mm outer diameter tubes and supports a maximum working pressure of 160 bar (2321 psi). Manufactured by Danfoss within the VLT Control Cards series, it adheres to the GAS (BSPP) thread standard with a G 1/2 thread size. Made from standard steel.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
134B1732 model is a member of VLT Control Cards and pairs with the Waltech tube fitting series to provide a standardized connector family for instrument and hydraulic assemblies. The straight female stud fitting offers an axial connection form that secures the mating part and reduces potential leak paths. Thread standard GAS (BSPP) gives a parallel thread form which suits common sealing practices. Its thread size G 1/2" defines the external thread interface, allowing selection of mating components with matching BSPP geometry.
The outer diameter of the tube is 15 mm that sets the tube capacity and guides wall thickness. Maximum working pressure of 160 bar (2321 psi) establishes the maximum allowable system pressure and directs selection for high-pressure hydraulic circuits. The device material is standard steel that provides baseline mechanical strength and machinability for manufacture and assembly. Option material stainless steel 1.4571 supplies corrosion resistance for aggressive environments and compatibility with saline or chemical exposure. Mass of (100 pcs) 8.6 kg indicates bulk handling for storage and shipping calculations. Its fitting model GAS 15 LR identifies the specific catalog item for procurement and inventory control.
The item 134B1732 appears alongside connection geometry that requires specific wrench sizes during assembly. Hex size “1” measured at 24 mm defines the first wrench face used to tighten the connector body. Hex size “2” measured at 27 mm identifies the second wrench face used to counter hold the fitting during installation. The VLT 2800 platform supports mains voltage ranges of 200–240 V and 380–480 V which determine supply compatibility for single and three phase installations. The module accepts an output frequency range up to 0–1000 Hz plus the standard enclosure class is IP20.
Frequently Asked Questions about 134B1732:
Q: How does the fitting type influence installation of model 134B1732?
A: Fitting type straight female stud specifies a straight stud interface that offers axial alignment during assembly. This configuration simplifies insertion and tightening while providing a stable mechanical joint.
Q: Which thread standard applies to model number 134B1732?
A: The thread standard GAS (BSPP) identifies a parallel thread form used on the connector. This specification requires compatible BSPP mating threads and appropriate seal rings.
Q: What is the thread size used on 134B1732 device?
A: Device’s thread size of G 1/2" defines the connector thread dimension used for mating components. This size determines available thread engagement and torque limits during assembly.
Q: What tube outer diameter does part number 134B1732 accept?
A: Tube outer diameter 15 mm sets the nominal tube size that the fitting accommodates. It further determines flow area and influences pressure drop for short runs.
Q: What maximum working pressure is rated for 134B1732?
A: Its maximum working pressure of 160 bar (2321 psi) establishes the allowable operating pressure for the fitting.
