NXL00035C2H1SSS0000
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The NXL00035C2H1SSS0000 is a chassis-mounted drive with an output power of 0.75 kW and a continuous output current of 2.2 A. Manufactured by Danfoss, it is part of the VLT FC 302 Automation Drives series and operates on 3x380-480 V AC with a frequency tolerance of ±5%. It features an IP20 protection rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VLT FC 302 Automation Drives series includes the Danfoss NXL00035C2H1SSS0000, a tiny and dependable drive built for precision control in small to medium-sized industrial settings. This drive can power a wide range of motor-driven operations since it has an output power of 0.75 kW and a constant output current of 2.2 amps. It can take input voltages that are up to 10% higher or lower than its nominal rating, which makes it very flexible and strong in places where mains voltage changes a lot.
The drive has IP20 protection, which makes it perfect for use in electrical enclosures. It can also work reliably at temperatures up to 55°C. The NXL00035C2H1SSS0000 uses a digital signal processor (DSP) to quickly and accurately control and watch the motor that is linked to it. It has an Electronic Thermal Relay (ETR) that continually calculates the motor's temperature depending on the current load and time. This helps keep the motor from overheating and breaking down. The drive also employs IGBT (Insulated-Gate Bipolar Transistor) technology to provide a sinusoidal current output by pulse-width modulation.
This makes sure that the drive is very efficient and switches quickly. Some IGBT modules can also regulate a brake resistor, which is useful for applications that need to stop quickly. Setting the drive back to its factory default settings is done by using option 14-22 (Operation Mode). The drive works well for intermittent duty cycles, which means it can handle sequences of load and rest intervals. This makes it useful for situations where the drive doesn't operate all the time. Danfoss stresses that the system integrator or machine builder must carefully look at dangerous scenarios from a safety point of view.
Frequently Asked Questions about NXL00035C2H1SSS0000:
Q: What input voltage does the NXL00035C2H1SSS0000 require?
A: The drive operates on an input voltage of 3x380-480 V AC.
Q: What is the voltage tolerance for this model?
A: It supports a voltage tolerance of ±10%, providing flexibility for varying supply conditions.
Q: What frequency range is supported?
A: The drive is compatible with 50/60 Hz frequencies and allows a tolerance of ±5%.
Q: What is the output power rating?
A: The output power for this model is 0.75 kW, suitable for small to medium automation applications.
Q: What is the continuous output current?
A: The drive can deliver a continuous output current of 2.2 A.
