FC302PK75T5E20H1 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC302PK75T5E20H1 is part of the VLT FC 302 Automation Drives series and features an IP20 enclosure rating and an integrated EMC filter. It offers a typical shaft power of 0.75 kW at 400 V, has a continuous output current of 2.1 A at 500 V, and an efficiency of 0.96. The drive supports three input phases and allows shielded motor cable lengths up to 150 meters.
Internal Product Review
The FC302PK75T5E20H1 is a Danfoss VLT FC 302 automation drive that stands out with three-phase input and IP20 enclosure protection. High operating efficiency of 0.96 and 0.75 kW typical shaft power at 400 V support precise, energy-conscious motor control. Integrated EMC filtering and 150 m shielded motor cable capability make this drive especially practical for clean industrial installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC302PK75T5E20H1 is a variable frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. In automated plants, it converts fixed three-phase mains power into a controllable output that allows connected control systems to vary induction motor speed, torque, and process flow without mechanical throttling. The unit is intended for low-horsepower applications that require precise speed regulation and integrated electromagnetic compatibility within control cabinets.
The drive is housed in an IP20 enclosure and delivers a continuous apparent power of 1.7 kVA when supplied with 460 V. At 500 V, its input current is 1.9 A, and the inverter can supply 2.1 A to the motor terminals. Conversion efficiency reaches 0.96, with 46 W of power lost as heat at maximum load, which reduces cabinet cooling requirements. An integrated EMC filter limits conducted emissions, and the drive is assigned to overvoltage category III for installation on fixed industrial wiring. One analog output is available for transmitting process data to external control equipment. The power connection requires three input phases, and the drive can be started no more than twice per minute to protect its charging circuit. Shielded motor cables can extend up to 150 m without requiring output reactors.
The logic section provides a maximum digital sink or source capacity of 40 mA for connected relays or indicators. The permissible phase imbalance on the incoming supply is limited to 3.0% of rated voltage to prevent excessive stress on the rectifier. Typical mechanical shaft power available at 400 V is 0.75 kW, making the drive suitable for small centrifugal pumps, blowers, conveyors, and similar motor-driven equipment. Its analog and digital interfaces allow operating status and process values to be exchanged with external automation components. The controlled inverter output lets the connected motor respond to changing process demands while avoiding the energy losses associated with mechanical flow control.
