FC302PK55T5E20H1 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The FC302PK55T5E20H1 is a drive manufactured by Danfoss and part of the VLT FC 302 Automation Drives series. It has a rated power of 55 kW and a continuous output current of 130 A at 441-500 V. The enclosure is IP20 rated, with dimensions of 660 mm in height, 370 mm in width, and 333 mm in depth, and the drive weighs up to 50 kg.
Internal Product Review
The FC302PK55T5E20H1 is a Danfoss VLT FC 302 automation drive designed for 3-phase systems with a 55 kW power rating. IP20 enclosure protection and 0.98 rated efficiency support dependable cabinet integration and efficient operation. A 130 A continuous output current makes this unit a strong choice for demanding automation duty.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC302PK55T5E20H1 is an AC variable frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. It belongs to the VLT AutomationDrive FC product group and regulates three-phase motors, providing precise speed and torque control in conveyors, pumps, and general process equipment. By converting a constant mains frequency into a variable output waveform, the unit supports energy-efficient automation while maintaining stable motor operation under changing load conditions.
The drive is rated for a continuous output current of 130 A when supplied from 441–500 V lines, making it suitable for motors with a power rating of up to 55 kW. At rated load, its efficiency reaches 0.98, so only 2% of the input energy becomes heat. The corresponding power loss is 1022 W, which must be removed through adequate cabinet ventilation. The output frequency can be adjusted from 0 to 590 Hz, providing a wide speed range for high-pole or rewound motors. For intermittent overloads, the inverter can deliver a 150% overload for 1 minute every 10 minutes, providing extra torque during acceleration or process disturbances. The mains section supports three-phase supplies and meets EN 55011 Class A1/B emission limits, allowing installation in commercial and light-industrial areas without additional filters.
The housing has an IP20 rating and must be installed inside a suitable enclosure. This protection level prevents fingers from reaching hazardous internal parts but does not protect the drive against water. Its C4 frame has a depth of 333 mm, a width of 370 mm, and a height of 660 mm, allowing front-access wiring while maintaining standard panel clearances. The inverter weighs up to 50 kg, so the panel backplate must support the static load securely. Upstream conductors as large as 95 mm² connect through the mains terminals. A shielded motor cable can extend up to 150 m without exceeding the drive’s cable-length limit.
