Product Description:

The FC302PK37T5E20H5XGCXXXSXXXXA0BXCXXXXDX is a variable frequency drive assembled by Danfoss for the VLT FC 302 Automation Drives series. The unit modulates three-phase mains power to regulate induction motor speed in conveyor, pump, and fan applications, providing closed-loop process control without mechanical throttling. By housing the control electronics, power stage, and front-mounted LCP 102 keypad in a single IP20 chassis, the product simplifies installation inside standard industrial panels.

The drive supports a nominal motor output of 0.37 kW, which corresponds to 0.5 HP for fractional-horsepower motor applications. With a 500 V supply, the input line draws 1.0 A, and the inverter delivers the same output current while maintaining an efficiency of 0.93. The IP20 enclosure blocks accidental finger contact with internal components while allowing airflow through the surrounding cabinet. Apparent power demand is limited to 0.9 kVA at 460 V, which reduces the load placed on the supply transformer. The drive does not include an internal brake chopper, so braking energy must be handled by external equipment when regenerative events occur.

An overvoltage alarm triggers at 855 V DC, while a DC-link voltage warning activates at 810 V DC to provide protection during supply surges. Internal dissipation remains low, with total power loss held to 35 W, so the drive places a limited thermal load on the enclosure. Electromagnetic compatibility complies with the EN/IEC 61800-3 Category 3 emission limits. An integrated PROFIBUS DP-V1 MCA 101 option card enables real-time setpoint exchange with PLC networks. Standard cable entries support straightforward routing of shielded motor leads and control wiring without special glands. The uncoated printed circuit boards are suitable for clean electrical rooms where conformal protection is unnecessary.