FC302PK37T5E20H5XGCXXXSXXXXA0BX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC302PK37T5E20H5XGCXXXSXXXXA0BX belongs to the VLT FC 302 Automation Drives series and features a rated power of 0.37 kW with a supply voltage of 3 x 380–500 V AC. It offers 2 digital outputs, each with a current of 40 mA, and a 12-bit analog output resolution. The drive has an enclosure rating of IP20 and supports a maximum output frequency of 590 Hz.
Internal Product Review
The FC302PK37T5E20H5XGCXXXSXXXXA0BX is a Danfoss VLT FC 302 automation drive well suited for precision motor control, rated at 0.37 kW with 3 x 380–500 V AC input. PROFIBUS DP-V1 MCA 101 and the Graphical LCP 102 support efficient integration and clear commissioning access. IP20 protection and 590 Hz maximum output frequency make the unit a strong choice for panel-based automation duty.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC302PK37T5E20H5XGCXXXSXXXXA0BX is a variable frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. Designed as a compact chassis unit, it converts fixed-frequency three-phase mains power into a modulated output that allows machine controllers to regulate induction motor speed, starting torque, and braking profiles. By varying the stator frequency electronically, the drive can lower energy consumption and reduce mechanical stress on pumps, fans, conveyors, and other material-handling equipment. Its compact design is intended for integration into industrial control systems where adjustable motor operation is required.
This drive delivers 0.37 kW of continuous output and connects to a 3 × 380–500 V AC three-phase supply. It can provide motor frequencies up to 590 Hz, while the pulse-width modulation carrier reaches 110 kHz for precise torque control. The enclosure has an IP20 rating, so the unit must be installed inside a closed control cabinet that prevents exposure to unsuitable contaminants and moisture. The drive has no internal brake chopper or mains option, so regenerative braking and line isolation require external equipment when those functions are needed. Its circuit boards do not have a protective coating, and standard cable entries are included for routing power and control conductors. Conducted emissions comply with EN/IEC 61800-3 Category 3 requirements for industrial locations within the VLT AutomationDrive FC product group.
System feedback is available through an analog output with 12-bit resolution, providing detailed signal representation for monitoring applications. Status signaling is handled by two digital outputs, each of which can source up to 40 mA for compatible control devices. The optional PROFIBUS DP-V1 MCA 101 interface exchanges setpoints and diagnostic data with connected PLCs, while the Graphical LCP 102 panel supports local configuration and operating checks. Motor and control wiring can use shielded cable runs up to 150 m, while unshielded cable lengths can reach 300 m in locations where radio-frequency interference is adequately controlled. The unit’s conducted and radiated noise classification is EN 55011 Class A2, making it appropriate for industrial premises rather than residential environments. Proper cable shielding, grounding, and separation from sensitive signal wiring help maintain stable communication and motor control over extended cable routes.
