Product Description:

The FC302P7K5T6134L3828HXBGXX is an AC variable-frequency drive produced by Danfoss for the VLT FC 302 Automation Drives series. Within an automated plant, it converts fixed-frequency three-phase mains power into a regulated output waveform so induction motors can run at the speed required by conveyors, pumps, or process equipment. Integrated motor protection monitors operation and helps protect the connected motor from overload and thermal stress.

This drive supplies a continuous shaft power of 7.5 kW, making it suitable for mid-range fan or compressor duties. The inverter can deliver an output frequency of up to 590 Hz, while its flux control functions operate at frequencies up to 300 Hz. These separate operating limits support high-speed machinery and constant-torque applications. User interaction occurs through the Graphical LCP 102 panel, which displays operating parameters and diagnostic information without requiring additional tools. A built-in brake chopper manages surplus DC bus energy during rapid deceleration, helping prevent overvoltage trips when a load stops abruptly. This configuration does not include EMC filtering, so external filtering may be necessary where conducted-emission limits apply.

Control wiring provides 6 digital inputs, two digital outputs, two relays, two analog inputs, and one analog output for closed-loop process control and basic start-stop logic. Motor leads may extend up to 150 m when shielded or 300 m when unshielded, providing flexibility for equipment distributed across larger installations. The internal 24 V sensor supply can provide up to 200 mA for encoders, pressure transmitters, or position switches without an auxiliary power supply. The available relay, analog, and digital connections allow the drive to exchange operating signals with external control equipment. Parameters and diagnostic information can be accessed through the local keypad or a compatible fieldbus connection.