FC302P7K5T6134L1012HXXGXX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC302P7K5T6134L1012HXXGXX is part of the VLT FC 302 Automation Drives series and has a rated power of 7.5 kW. It offers continuous apparent power of 11 kVA at both 550 V and 575 V, with a 150 meter shielded or 300 meter unshielded motor cable length. The drive features a 12-bit analog output resolution and provides a digital output current of 40 mA.
Internal Product Review
The FC302P7K5T6134L1012HXXGXX is a Danfoss VLT FC 302 automation drive with a 7.5 kW rating and 11 kVA continuous apparent power. Support for 150 m shielded motor cable length and 300 m unshielded motor cable length gives the drive excellent installation flexibility in distributed systems. A 32 kHz maximum digital output frequency makes the model a strong choice for smooth, accurate motor control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC302P7K5T6134L1012HXXGXX is an AC variable frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. It conditions three-phase power and delivers a controlled output, allowing a PLC to regulate motor speed without mechanical throttling. This electronic adjustment improves process accuracy and can reduce energy use in conveyors, pumps, fans, and similar equipment.
The inverter provides a rated motor output of 7.5 kW and supports a continuous apparent output power of 11 kVA when connected to a 550 V or 575 V supply. At 550 V, the rectifier draws 10.4 A, while the input current decreases to 9.9 A when the supply is 575 V. The inverter can deliver 11.5 A to the motor when operating from 525 V to 550 V mains. Its motor output current is 11 A when the supply is between 551 V and 600 V. Internal power losses are limited to 261 W, so standard panel ventilation is generally sufficient when the required installation clearances are maintained. These electrical characteristics allow the drive to control motors used in midrange production machinery while limiting heat generation and input current demand.
The analog output provides 12-bit resolution for precise monitoring of process and drive values. Fast status signaling is supported by digital outputs that can switch at up to 32 kHz, and each channel can carry 40 mA. A high-voltage warning is activated when the DC link reaches 965 V DC. The brake chopper engages at 943 V DC, while an overvoltage alarm is issued at 975 V DC to protect the power stage. The drive is supplied without a dedicated mains option and uses standard cable entries for power and control wiring. Motor cables may extend up to 150 m when shielded or 300 m when unshielded, allowing flexible placement of the drive and connected motor within industrial installations.
