FC302P7K5T6131B0426HXXGXX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC302P7K5T6131B0426HXXGXX is part of the VLT FC 302 Automation Drives series and has a rated output power of 7.5 kW with a rated output current of 11 Amps at 575 Volts. This drive supports a maximum output frequency of 590 Hz, can provide up to 160% starting torque for 60 seconds, and has an energy efficiency class of IE2. It offers a maximum shielded motor cable length of 150 meters and features standard cable entries.
Internal Product Review
The FC302P7K5T6131B0426HXXGXX is a Danfoss VLT FC 302 automation drive rated for 10 hp and 7.5 kW output. A 1 ms torque rise in flux and 160% starting torque give this unit sharp, dependable motor response in demanding automation duty. IE2 energy efficiency makes the drive an especially strong choice for continuous industrial service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC302P7K5T6131B0426HXXGXX is an AC variable frequency drive produced by Danfoss within the VLT FC 302 Automation Drives series and the broader VLT AutomationDrive FC product group. It converts fixed-frequency three-phase power into a modulated output for induction or permanent-magnet motors. This controlled output enables speed and torque adjustment in conveyors, pumps, and general material-handling stations.
At 575 V, the inverter supplies 7.5 kW of continuous mechanical power, which corresponds to 10 hp. Its DC-link and IGBT stage handle a continuous apparent power of 11 kVA while maintaining an output line current of 11 A at 575 V. Input current is 9.9 A, supporting installation on standard 575 V feeders without requiring oversized breakers. The controller can deliver 160% starting torque for 60 seconds during any ten-minute period, and its 1 ms torque rise time provides a rapid transition from idle to load. The drive has an IE2 efficiency classification, so most of the input energy reaches the motor rather than being dissipated internally. Maximum output voltage equals the full supply voltage, giving the drive sufficient headroom for flux-optimized vector control at low speeds. The drive does not include an integrated mains disconnect or line filter, allowing those components to be selected separately for the control panel.
High-speed operation is supported by a maximum output frequency of 590 Hz, while the flux control loop limits internal magnetic excitation to 300 Hz to protect the motor core. The high-resolution pulse input accepts encoder or sensor signals up to 110 kHz. Digital outputs are rated for 40 mA, which is sufficient to drive opto-isolators or external relays. Standard cable entries simplify routing, and the inverter supports shielded motor leads up to 150 m or unshielded motor leads up to 300 m without derating. Thermal dissipation at rated load reaches 261 W, so enclosure airflow must remove the generated heat to keep the power section within its operating temperature limits.
