FC302P7K5T2131F0224H2BGXX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC302P7K5T2131F0224H2BGXX is part of the VLT FC 302 Automation Drives series and features a rated power of 7.5 kW. It supports a supply voltage range of 200 to 240 VAC, a supply frequency of 50/60 Hz, and provides an output frequency up to 590 Hz. This drive comes with a built-in brake chopper and is equipped with the graphical LCP 102 local control panel.
Internal Product Review
The FC302P7K5T2131F0224H2BGXX is a Danfoss VLT FC 302 automation drive rated at 7.5 kW for 200–240 VAC systems. Included brake chopper support and output frequency up to 590 Hz make the drive especially capable in demanding motion and process control applications. Strong electrical efficiency is a standout, supported by a displacement power factor above 0.98.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC302P7K5T2131F0224H2BGXX belongs to the VLT FC 302 Automation Drives series manufactured by Danfoss. It functions as an AC variable-frequency drive that converts fixed-voltage, three-phase mains power into a modulated output for regulating the speed of induction motors in industrial automation. A built-in brake chopper dissipates regenerated energy during rapid deceleration, reducing excess voltage in the DC link when a connected motor slows quickly. The Graphical LCP 102 keypad provides local access to parameters, operating commands, and drive status information without requiring a separate control terminal.
This model accepts a line voltage of 200–240 VAC ±10% at a frequency of 50/60 Hz ±5% and delivers up to 7.5 kW of shaft power. The inverter provides an output frequency range of 0–590 Hz, supporting motors and processes that require operation across a broad speed range. Flux control operates within 0–300 Hz to maintain suitable motor magnetization throughout its permitted range. The displacement factor remains above 0.98, which helps minimize the reactive current drawn from the electrical supply. Output voltage can be adjusted from zero to 100 percent of the incoming supply voltage, allowing the drive to regulate motor torque at reduced speeds. The drive permits no more than two power starts per minute, protecting its semiconductor components from excessive thermal stress caused by repeated inrush current. No additional EMC filter is installed, and conducted emissions comply with the EN 55011 Class A2 limits.
The motor cable can have a maximum length of 150 m with shielded conductors, allowing the drive cabinet to be positioned away from the connected machine when required. An unshielded motor cable can extend to 300 m, although cable routing and electrical interference must be considered when planning the installation. The true power factor remains at least 0.9 under full load, helping the drive use incoming electrical power efficiently during rated operation. Immunity performance complies with EN/IEC 61800-3 Category 3, making the drive suitable for industrial locations where substantial electrical interference may be present. Shielding, grounding, and cable separation should follow the applicable installation requirements to preserve electromagnetic compatibility and stable motor control over long cable runs.
