FC302P7K5B1134G1789H2XGXX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC302P7K5B1134G1789H2XGXX is part of the VLT FC 302 Automation Drives series and delivers a rated power of 7.5 kW. It features a maximum output frequency of 590 Hz and can operate at full load in ambient temperatures up to 45 °C. The drive offers a start torque of 160% for 60 seconds and supports a supply frequency of 50 or 60 Hz with ±5% tolerance.
Internal Product Review
The FC302P7K5B1134G1789H2XGXX is a Danfoss VLT FC 302 automation drive with 7.5 kW rated power and an IE2 efficiency class. A 1 ms torque rise time in flux mode and 160% start torque for 60 s give the unit strong dynamic response in demanding applications. High-speed operation up to 590 Hz is a standout capability.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC302P7K5B1134G1789H2XGXX is an AC variable frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. It serves as a closed-loop inverter that modulates voltage and frequency to control the rotational speed of standard three-phase motors in factory machines, HVAC fans, and material-handling systems. The housing and control layout are consistent across the platform, supporting cabinet integration and fieldbus wiring. Its closed-loop capabilities also support applications that require controlled acceleration, steady speed regulation, or rapid changes in motor torque.
The drive is rated for a continuous motor load of 7.5 kW, enabling mid-range pumps or conveyors to run without external gear reduction. It accepts utility power at 50/60 Hz ±5%, so the same model works with either common mains frequency. Output frequency can be adjusted up to 590 Hz, providing overspeed capability for high-speed spindles when the connected mechanical system permits it. For demanding startups, the inverter can deliver 160% of rated torque for 60 seconds, allowing loaded machines to overcome static friction or acceleration peaks. Dynamic response in flux-vector mode is fast, with commanded torque reaching its target within 1 ms. This response supports precise tension control and positioning applications where motor torque must change quickly as operating conditions vary.
Motor leads may extend to 150 m when shielded or 300 m when unshielded, allowing the drive to remain in a centralized panel while the motor operates on a moving carriage or distant process island. Vector control using the VVC+ algorithm reaches the requested torque within 10 ms, providing stable acceleration when encoder feedback is unavailable. Ambient operation can continue at temperatures up to 55 °C with current derating, allowing the unit to operate in non-air-conditioned enclosures near heat-emitting machinery. Standard cable entries simplify routing during installation and provide organized access for power and control conductors. The drive carries an IE2 efficiency classification and can operate at altitudes up to 3000 m. These operating limits should be considered when selecting motor cables, enclosure ventilation, and installation location.
