Product Description:

The FC302P5K5T5131Z0463H2XGXX is an AC variable-frequency drive produced by Danfoss for the VLT FC 302 Automation Drives series. It converts fixed-frequency three-phase mains power into a modulated output that lets controllers adjust induction motor speed in conveyors, pumps, and material-handling equipment. By integrating current, voltage, and thermal feedback, the unit maintains motor performance while reducing mechanical wear and energy use in automated installations.

This model delivers a continuous output of 5.5 kW, equivalent to 7.5 hp, so it fits midrange applications that need moderate shaft power. The inverter can generate carrier frequencies up to 590 Hz, while its internal design limits magnetic flux to 300 Hz, preventing core saturation during high-speed operation. Two programmable digital outputs report drive status or speed references, helping simplify wiring to PLC input cards. Overall system efficiency is supported by a displacement power factor above 0.98, minimizing reactive current drawn from the mains. Additional I/O includes one analog output for process feedback, two relay contacts for external interlocks, and standard cable entries that accept metric glands without adapters.

The control terminals source a reference signal of 15 mA at 10 V and can power sensors or brakes with 200 mA at 24 V, eliminating the need for separate power supplies in many panels. Motor leads can be routed through up to 150 m of shielded cable without exceeding voltage or EMC limits, or through 300 m of unshielded cable where that cable type is acceptable. Conducted and radiated emissions comply with EN 55011 Class A2, while immunity meets EN/IEC 61800-3 Category 3. These ratings support installation in industrial zones that share power with sensitive instrumentation. The drive does not include an integrated brake chopper, so dynamic braking must be handled by an external resistor or a regenerative solution when rapid deceleration is required.