FC302P15KT5E20H2BGXXXXSXXXXAXB Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC302P15KT5E20H2BGXXXXSXXXXAXB is part of the VLT FC 302 Automation Drives series and has a rated power of 15 kW or 20 hp. The drive supports a supply voltage of 380-500 VAC across 3 phases and includes a brake chopper, with a continuous output current of 27 A at 441-500 V. This model features IP20 enclosure rating, standard cable entries, and operates with a power loss of 379 W.
Internal Product Review
The FC302P15KT5E20H2BGXXXXSXXXXAXB is a Danfoss VLT FC 302 automation drive designed for 380-500 VAC three-phase systems. Included brake chopper and 0.98 efficiency make the unit especially attractive for controlled deceleration and energy-conscious drive cabinets. IP20 enclosure protection and 27 A continuous output current support dependable integration in standard industrial panels.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC302P15KT5E20H2BGXXXXSXXXXAXB is an AC variable frequency drive produced by Danfoss for the VLT FC 302 Automation Drives series. It converts fixed-frequency three-phase power into a modulated output for controlling motor speed and torque. This control allows pumps, conveyors, and fans to match their output to changing process demands, which can reduce unnecessary energy use in automated production lines. The drive can also regulate acceleration and deceleration to support smooth mechanical operation under varying loads.
The three-phase input draws up to 29 A of continuous current through the rectifier stage. On the inverter side, the drive supplies 27 A continuously and can provide 43.2 A during short acceleration periods, giving the motor additional current for dynamic loads. Nominal shaft power is 15 kW, which corresponds to 20 hp. Conversion efficiency reaches 0.98, and the drive produces 379 W of heat under rated operating conditions. A factory-installed brake chopper manages regenerated energy by directing it to a compatible external braking resistor during deceleration. The B3 frame keeps cabinet depth moderate, while standard cable entries simplify routing through the gland plate. The drive is supplied without an LCP panel or a mains disconnect, so control access and supply isolation must be provided through external equipment. Its control boards do not have a protective coating and should be installed where moisture and airborne contaminants are adequately controlled.
The housing has an IP20 rating and is intended for installation inside a ventilated electrical enclosure. The input accepts 380–500 VAC from a three-phase supply, supporting common industrial power systems within that voltage range. An integrated A2 filter limits conducted electrical emissions on industrial networks. Internal fans positioned behind the B3 frame remove heat from the power electronics and maintain airflow through the enclosure. Adequate clearance around the ventilation paths is necessary to prevent restricted cooling during continuous operation. External isolation hardware must remain accessible because the drive does not include a built-in mains disconnect.
