FC302P11KT5131F0428H2XGXX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC302P11KT5131F0428H2XGXX is part of the VLT FC 302 Automation Drives series and has a power rating of 11 kW with three input phases. It features a 12-bit analog output resolution, maximum output frequency of 590 Hz, and a graphical LCP 102 control panel. Additional specs include a digital output current of 40 mA, an overvoltage category of III, and a maximum shielded cable length of 150 meters.
Internal Product Review
The FC302P11KT5131F0428H2XGXX is a Danfoss VLT FC 302 automation drive with an 11 kW power rating and 3-phase input. The graphical LCP 102 control panel and 590 Hz maximum output frequency support efficient commissioning and responsive motor control. A strong drive platform for demanding automation applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC302P11KT5131F0428H2XGXX is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. Positioned between a three-phase supply and an asynchronous motor, it modulates output frequency and voltage so automated lines can match motor speed to process demand. The drive is intended for cabinet mounting in industrial automation systems where available space, wiring reach, and compatible control interfaces are important. Its regulated output supports variable-speed motor operation in applications such as conveyors, pumps, fans, and processing equipment.
This model delivers a continuous output of 11 kW and can raise motor speed to a maximum output frequency of 590 Hz. Analog feedback channels provide 12-bit resolution, supporting precise signal conversion for connected control devices. The digital terminal block supplies field devices with up to 40 mA of current. Local interaction takes place through the Graphical LCP 102 keypad, which provides direct access to operating parameters without requiring an external interface. The drive does not include an internal brake chopper, so applications that require dynamic braking must use an appropriate external braking arrangement. Input wiring passes through a standard cable-gland plate, and three mains phases connect without an integrated line switch. The printed circuit board does not have a conformal coating. The drive should be powered up no more than once per minute to reduce stress caused by repeated inrush current.
The frequency section supports a maximum commanded flux of 300 Hz, which keeps magnetizing current within the drive’s operating limits. Shielded motor cables may extend up to 150 m, while unshielded motor cables may extend up to 300 m before reflected-wave effects exceed applicable IEC limits. Conducted emissions comply with EN/IEC 61800-3 Category 3, making the drive suitable for typical industrial electrical environments when installed correctly. Radiated emissions comply with EN 55011 Class A2, which applies to industrial equipment rather than residential installations. The power stage has an overvoltage category III rating and can be connected to fixed facility wiring supplied through distribution transformers. These electrical limits should be considered when selecting motor cables, routing conductors, and arranging protective equipment in the cabinet.
