FC302P11KT2131H4575H2XGXX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC302P11KT2131H4575H2XGXX is part of the VLT FC 302 Automation Drives series and supports a supply voltage of 200 to 240 V AC and a supply frequency of 50 or 60 Hz. This drive features an output frequency range of 0 to 590 Hz and supports analog output from 0 or 4 to 20 mA. Its digital input range is 0 to 24 V DC, with a maximum digital input voltage of 28 V DC.
Internal Product Review
The FC302P11KT2131H4575H2XGXX is a Danfoss VLT FC 302 automation drive with a 200–240 V AC supply range and output frequency up to 590 Hz. True power factor of ≥0.9 and displacement power factor above 0.98 support efficient, stable performance in demanding drive applications. Support for shielded motor cable lengths up to 150 m makes the drive a strong choice for flexible industrial installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC302P11KT2131H4575H2XGXX is an AC variable frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. It converts fixed-frequency three-phase power into a pulse-width-modulated output that allows PLCs to regulate motor speed. This control can conserve energy and maintain consistent process throughput across a wide range of industrial automation tasks.
The drive accepts a line supply of 200–240 V AC ±10% at a nominal frequency of 50/60 Hz ±5%. It can tolerate a line imbalance of 3.0% of the rated voltage without derating. On the output side, the inverter delivers 0–100% of the incoming voltage and supports an adjustable frequency span of 0–590 Hz. A dedicated flux-mode band allows excitation to be limited to 0–300 Hz for motor tuning. Process control signals are handled through an analog channel that sources or sinks 0/4–20 mA, while eight digital inputs recognize 0–24 V logic and include protection that clamps at 28 V DC. A single transistor output can drive external relays with up to 40 mA of current. These interfaces allow the drive to connect to sensors, contactors, and programmable controllers installed on the machine.
High-speed modulation is supported by a maximum carrier frequency of 32 kHz and a pulse-train range that reaches 0–110 kHz, enabling fine torque resolution when the drive is paired with modern motors. Installation flexibility is aided by support for up to 150 m of shielded motor cable or 300 m of unshielded motor cable, allowing the enclosure to remain distant from the driven equipment. The converter maintains a displacement power factor greater than 0.98 and a true power factor of at least 0.9, helping facilities meet power-quality targets. Standard cable entries simplify gland plate preparation and provide organized routing for power and control conductors.
