Product Description:

The FC-302PK75T5E21H2BXXXXXSXXXXAXBXCXXXXDX is a variable frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. The unit modulates the output frequency and voltage delivered to a three-phase induction motor, allowing speed, torque, and energy consumption to be matched to process demand. In industrial automation, it functions as the intermediary between the mains supply and the motor, enabling closed-loop or open-loop control of conveyors, pumps, and material-handling equipment.

It is rated for 0.75 kW of continuous power, equivalent to 1.0 HP, and accepts a three-phase supply of 380–500 VAC. Within this range, the inverter maintains motor excitation up to 590 Hz, so high-speed spindles can be driven without external gear changes. The housing has an IP21 / Type 1 ingress protection rating that permits installation inside standard control cabinets. The integrated RFI filter helps the drive meet EN/IEC 61800-3 Category 3 and EN 55011 Class A2 emission limits. Motor leads may extend up to 150 m when shielded or 300 m when unshielded, supporting remote machine layouts. Braking energy is handled by the internal brake chopper, and the drive can be energized twice per minute without exceeding its thermal limits.

The analog output has 12-bit resolution, allowing supervisory PLCs to read precise speed or load data. Two digital or pulse outputs can source up to 40 mA, and the logic inputs tolerate levels up to 28 V DC. A pulse train of up to 110 kHz supports high-resolution positioning, while a carrier frequency ceiling of 32 kHz supports operation with reduced audible noise. Standard cable entries simplify wiring, and the uncoated printed circuit board remains accessible for servicing. Option slots A, B, C0, C1, and D are empty, keeping the drive configuration compact.