Product Description:

The FC-302PK75T5E20H1BXXXXXSXXXXAXBXCXXXXDX is a variable frequency drive produced by Danfoss for the VLT FC 302 Automation Drives series. It modulates incoming AC power so higher-level controllers can regulate induction-motor speed and torque in conveyors, pumps, and other automated machinery. In automated lines, it serves as the power-control layer between the supply network and the motor. The unit is supplied without an LCP keypad, and the standard language pack remains available for menu-based setup through compatible accessories.

The drive delivers a continuous output of 0.75 kW, which corresponds to 1.0 HP. It connects to mains supplies from 380–500 VAC on three-phase power, making it suitable for common industrial electrical systems. That power level suits compact pump, fan, and conveyor duties where precise speed control is more important than high motor size. The enclosure has a rating of IP20 / Chassis, so the unit is intended for installation inside a switchgear cabinet rather than on exposed machine surfaces. Standard cable entries support straightforward wiring, and the housing matches A, B, and C frame mounting dimensions used within this drive range.

Electromagnetic compatibility is supported by an integrated RFI Class A1/B (C1) filter, and regenerative energy is handled by a built-in brake chopper. The printed circuit boards are not coated, so the drive is best suited to clean cabinet environments with limited exposure to corrosive contaminants. Mechanical installation uses normal cabinet mounting for A, B, and C frames, which supports standard panel placement. All option slots, including A, B, C0, C1, D, and mains, are empty, and the adaptation field is set to no adaptation. Because no optional cards are installed, the base hardware remains open for application-specific expansion through compatible modules. The series identifier is 302, and software option C is disabled.