Product Description:

The FC-302PK75T5E20H1 is a Danfoss automation drive from the VLT FC 302 Automation Drives series. It converts fixed-frequency mains power into a regulated output that allows controllers to adjust induction motor speed and torque for pumps, fans, and conveyor modules in industrial automation. With a cabinet-mounted design and integrated control functions, the unit serves as the power interface between a three-phase supply and the mechanical load. It also monitors operating conditions such as current, temperature, and motor feedback during use.

This model accepts a mains window of 380–500 VAC, so it can be wired to common low-voltage industrial networks without a transformer. The inverter section is rated for a continuous electrical output of 0.75 kW, which corresponds to a mechanical shaft rating of 1.0 HP when paired with a standard four-pole motor. Supply conductors must include line connections and ground because the drive is intended for three-phase power, and balanced phase loading helps limit harmonic distortion and excess heat. The housing has an IP20 chassis construction, which protects against accidental contact with live parts but does not seal out dust moving through cabinet airflow. Thermal sensors and current limiters inside the enclosure help protect the power section when ambient temperature or load conditions rise above normal operating levels.

The drive mounts on DIN rails or back plates using the normal cabinet mounting for A, B, and C frames pattern, which supports standard panel installation. This arrangement also helps maintain clear access to the main terminals and supports orderly cable routing inside the enclosure. For electromagnetic compliance, the integrated filter is rated as RFI Class A1/B (C1), which helps reduce conducted interference when the drive is installed with appropriate wiring practices. The product is part of the VLT AutomationDrive FC group, and the platform identifier is 302.