FC-302PK75T5131G4986H2BGXXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-302PK75T5131G4986H2BGXXXXSXXXXAXBXCXXXXDX is part of the VLT FC 302 Automation Drives series. This drive operates on a mains voltage of 380 to 500 VAC using three-phase power and provides a power rating of 0.75 kW or 1.0 HP. It features a standard language pack and belongs to the VLT AutomationDrive FC product group.
Internal Product Review
The FC-302PK75T5131G4986H2BGXXXXSXXXXAXBXCXXXXDX is a Danfoss VLT FC 302 automation drive with a 0.75 kW rating and 1.0 HP capacity. Three-phase power and 380 - 500 VAC input make the unit a strong fit for stable automation service, with dependable performance as a key advantage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302PK75T5131G4986H2BGXXXXSXXXXAXBXCXXXXDX is a variable frequency drive released by Danfoss in the VLT FC 302 Automation Drives series. Designed for cabinet installation, the unit controls the speed of three-phase induction motors so production lines, pumps, and ventilation systems can respond to process demand instead of operating continuously at a fixed mains frequency. By regulating the output frequency and voltage supplied to the motor, the drive can reduce energy consumption during periods of lower demand. Controlled acceleration and deceleration also reduce mechanical stress on connected equipment, including couplings, belts, bearings, and driven loads.
The drive provides a continuous mechanical output of 0.75 kW, which is equivalent to 1.0 HP. Its rectifier and inverter sections accept an input supply ranging from 380–500 VAC. The unit is configured for three-phase power, allowing direct connection to compatible industrial electrical networks without an additional transformer. The series identifier is 302, which associates the drive with the applicable parameter structure, accessories, and communication options for this product line. These electrical characteristics support motor control in machinery that requires adjustable speed, regulated torque, and repeatable operating profiles. Proper branch protection, conductor sizing, and grounding must be selected according to the connected motor, supply conditions, and installation requirements.
The inverter belongs to the VLT AutomationDrive FC product group and uses the associated operator interface for local setup, command entry, and status monitoring. It is supplied with no C1 filter option, so additional EMC mitigation may be necessary when an installation must meet EMC category C1 limits on a public low-voltage supply. Appropriate mitigation can include an external filter, shielded motor cables, correct grounding, and suitable separation between power and control wiring. User interaction is provided through the factory-loaded standard language pack, which supports parameter navigation through the drive interface. Cable routing and shield termination should follow the applicable installation practices to reduce conducted and radiated electrical interference. Enclosure ventilation must also provide sufficient airflow around the drive to prevent excessive temperature rise during continuous operation.
