Product Description:

The FC-302PK55T5134G1689H2XGXXXXSXXXXAXBXCXXXXDX is an AC variable frequency drive produced by Danfoss for industrial motor control. Installed between the power source and an induction motor, it converts fixed-frequency line power into an adjustable electrical output that regulates motor speed. The drive produces a pulse-width-modulated output, allowing a PLC to command speed changes while maintaining suitable motor torque. This control method supports conveyors, pumps, and fans by reducing mechanical throttling, limiting unnecessary energy consumption, and decreasing wear on connected equipment.

The controller accepts an input supply ranging from 380–500 VAC and uses three-phase power, allowing direct connection to common industrial distribution systems. Its continuous electrical output is rated at 0.55 kW, which corresponds to a mechanical output of 0.75 HP. The internal power conversion components are sized to manage the thermal load associated with this output level during normal drive duty cycles. Voltage and current setpoints are scaled automatically when the related parameter group is initialized, making it easier to match the connected motor’s nameplate values. Proper entry of those values allows the controller to regulate current and voltage according to the motor’s operating requirements without unnecessary manual scaling.

Adaptation B is configured with no adaptation, so the factory programming and default control macros remain active. The drive also has no C1 option, which means an external line filter is required when the installation must meet category C1 electromagnetic compatibility requirements. The filter should be selected for the applicable supply voltage, motor load, and installation arrangement to provide the necessary mitigation without interfering with normal drive operation. The product is organized within the VLT AutomationDrive FC 302 platform, which establishes its applicable fieldbus choices, control architecture, and mechanical format.